View Single Post
Old 02-12-2017, 07:43   #5962 (permalink)
iOS_Shakil
No Life Poster
 
iOS_Shakil's Avatar
 
Join Date: Aug 2015
Location: Bd+
Posts: 2,100
Member: 2441719
Status: Offline
Sonork: uninstall
Thanks Meter: 2,073
nokia 101 flash done by ATF box..............

Quote:
VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

Booting Phone...
CPU ID Response: A200341100
CPU Type: XG110 2.1B
Phone Booted at after First attempt...

************************************************** ****
TIME STARTS HERE
************************************************** ****


Sending PBL 19456 bytes...
PBL Successfully Sent...

Sending SBL 65024 bytes...
SBL Successfully Sent...

Flash Chip Manufacturer: Samsung Electronics Corp.
Flash Chip Type: K8S6415ETC 64 Mbit (4Mb x 16) NOR
Extended Information: Multiple Bank / Burst / 1.8v

Processing Image File: K:\Nokia\phoenix\products\RM-769\rm769_008.100

Data Block Found...
Number of Sections: 03
IMAGE Certificate Block Sent Successfully...
Processing Section 01 of 03
IMAGE Erase Block: 0x00000000~0x0001FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 24576 bytes
Data Checksum: F5BE
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Processing Section 02 of 03
IMAGE Erase Block: 0x00800000~0x00BFFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 4128768 bytes
Data Checksum: 676D
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Processing Section 03 of 03
IMAGE Erase Block: 0x00C5D000~0x00E5FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 1697536 bytes
Data Checksum: 2FCD
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Processing Image File: K:\Nokia\phoenix\products\RM-769\rm769_008.10mg

Data Block Found...
Number of Sections: 01
IMAGE Certificate Block Sent Successfully...
Processing Section 01 of 01
IMAGE Erase Block: 0x00100000~0x005FE53E
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 5236032 bytes
Data Checksum: 2715
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Processing Image File: K:\Nokia\phoenix\products\RM-769\rm7690_nai08.10mg_nlt

Data Block Found...
Number of Sections: 01
IMAGE Certificate Block Sent Successfully...
Processing Section 01 of 01
IMAGE Erase Block: 0x00E60000~0x00F49FFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 958464 bytes
Data Checksum: 095F
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Exit Flash Mode Done...
Time Elapse : 00:04:24

************************************************** ****
You must Factory Reset the phone to enable the
ringtones and other customized settings to work
************************************************** ****


Waiting For Phone to go Online...

5, 4, 3, 2, 1...
MCU: V 08.10 02-04-13 RM-769 (c) Nokia
IMEI: 354582056499303
Product Serial Number: C1FA25FAH
Product Code : 059H0H2
Module Code : 0204883
Basic Production Code: 059P5G1
PPM SW Version : V 08.10 02-04-13 RM-769 (c) Nokia MG
ADSP Version : p+V 08.10\n02-04-13\nRM-769\n(c) NMP\nmg_nlt
MCU SW Version : V 08.10 02-04-13 RM-769 (c) Nokia
HW Version : 1000
UEM Version : 1328
UPP Version : 8850
LCD Version : WIN:BARACOAv95 NT39121
********** SIMLOCK INFO **********
CONFIG_DATA : 0010100000000000
PROFILE_BITS : 0000000000040002
ASIC : 11
PROVIDER : Default Test Operator

Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST : PASSED

FACTORY SET TO : Full Factory Set
OK
FACTORY SET TO : User Data
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Service Center
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : Production Tune
OK
 
 
Page generated in 0.07656 seconds with 7 queries