phone history
phone was phone is american 0pb70000 wanted to change to 0pb10000
found out later that that is not possible
too late for normal flashing recovery
because now at getvar i got MID 0pb10000 and can't change by fastboot
phone state before jtag emmc - only fastboot
phone state after jtag emmc - dead only qualcomm hs-usb
here is log
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 161610055F56B5ED, ,FW Ver.: 01.58
CMD Pullup Level:1732 mV
CMD Active Level:2340 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 90014A4842473465050101E63FE75132
EMMC CSD : D02701320F5903FFFFFFFFEF8A4040D2
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 05/2014 Rev.0x1
EMMC NAME: HBG4e , S/N: 31866855
EMMC NAME (HEX): 48424734652000
EMMC ROM1 (Main User Data) Capacity: 29824 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: HBG4e _ 31866855_20170316_1735.extcsd
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Skip loading eMMC Addon Firmware
CMD Pullup Level:1732 mV
CMD Active Level:2340 mV
Input file : D:\z3x\jtag\HTC-M8_ROM1_1Gb\HTC-M8_ROM1_00000000_40000000.bin
Writing 0040000000 bytes to 0000000000... ROM1 (USER ROM)
Done. Write Speed: 1296 kB/s
maybe rom1 file is bad
can you guys provide full dump ?
rom 2 , 3 ?
or what is the solution
thanks in advance