View Single Post
Old 03-17-2017, 16:06   #1 (permalink)
GSM_Support
Product Supporter
 
GSM_Support's Avatar
 
Join Date: Feb 2005
Location: GSMserver Team
Posts: 33,603
Member: 121052
Status: Offline
Sonork: 100.107126
Thanks Meter: 71,471
🐙 Octoplus / Octopus Box Samsung v.2.4.9 - support for latest Security patches! 🐙

Octoplus / Octopus Box Samsung Software v.2.4.9 Release Notes:

🐙 Added world's first support for the latest security (2017.01.01/2017.02.01 Security patch levels) - Direct Unlock, Read Codes, Read/Write Cert for the following devices:
- SM-A310F, SM-A310FD
- SM-A510F, SM-A510FD
- SM-A710F, SM-A710FD
- SM-J120F, SM-J120FN, SM-J120G, SM-J120M, SM-J120ZN, SM-J120W
- SM-J200F, SM-J200BT, SM-J200G, SM-J200GU, SM-J200M, SM-J200Y
- SM-J710F, SM-J710FN, SM-J710FZ
- SM-G550F, SM-G550FY
- SM-G570F
- SM-G610F
- SM-G930F, SM-G930FD
- SM-G935F, SM-G935FD
🐙 Added world's first "Repair IMEI" * and "Repair Network" ** operations for the following devices:
- SM-J200F, SM-J200BT, SM-J200G, SM-J200GU, SM-J200M, SM-J200Y
🐙 Added "Repair IMEI" * and "Repair Network" ** operations for SM-G389F

* Note:
  1. Device must be rooted and without SIM card inserted
  2. After performing Repair IMEI operation it is necessary to make Repair Network
  3. It will be necessary to repeat Repair Network operation to get an active (enabled) network after flashing the phone
** Note:
  1. Device must be rooted and without SIM card inserted
  2. It will be necessary to repeat Repair Network operation to get an active (enabled) network after flashing the phone
🐙 All supported operations described in details in the manual ("Cable & Manual" button in the software)


More info and discussion are HERE
_______________________________________________
WBR,
Octoplus Box Team

Last edited by Gsm Lab; 03-17-2017 at 17:39.
  Reply With Quote
The Following 230 Users Say Thank You to GSM_Support For This Useful Post:
Show/Hide list of the thanked
 
Page generated in 0.13042 seconds with 6 queries