View Single Post
Old 03-30-2017, 17:01   #1 (permalink)
CYB3R GSM
No Life Poster
 
CYB3R GSM's Avatar
 
Join Date: Oct 2015
Location: Unknown
Posts: 695
Member: 2469611
Status: Offline
Thanks Meter: 389
Q Mobile M6 MT6755 Android 6.0 Test Report Unsupported Device

Read Info
Code:
Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM41C
[eMMC] : FLASH_CID : 150100524331344D42074DFED0FFB3DD
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000E8F800000
[eMMC] : FLASH_UCP : 59640 MiB [eMMC 128 GiB]
DEV RID    : 0xB5A2B869A8A605DB119C1044B773D54F
INT RAM    : 0x00000000
EXT RAM    : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

[AP] : Initial info read Ok!


SECURITY : 
IMEI_SW [1] : 356xxxxxxxxxx667
IMEI_SW [2] : 356xxxxxxxxxx662
BTMAC Addr  : B898F74A8D55
WiFi MAC    : 3478D73B19FF

Done!
Elapsed: 00:00:12
Reconnect Power/Cable!
Read Flash
Code:
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM41C
[eMMC] : FLASH_CID : 150100524331344D42074DFED0FFB3DD
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000E8F800000
[eMMC] : FLASH_UCP : 59640 MiB [eMMC 128 GiB]
DEV RID    : 0xB5A2B869A8A605DB119C1044B773D54F
INT RAM    : 0x00000000
EXT RAM    : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!


[Read Ok] : preloader_gnbj6755_66_m.bin
[Read Ok] : recovery.img
[Read Stop] : Unknow data!
Make next steps : 
1. Use WinRar or 7zip and rar this folder : MT6755______
2. Send this archive with title "FWFACT" to [email protected]

Read error :(

Operation Failed
Elapsed: 00:00:19
Reconnect Power/Cable!
https://mega.nz/#!8lB3DCZI!O81ZNJ5af...9tS0rJXeQnTTDc
  Reply With Quote
The Following User Says Thank You to CYB3R GSM For This Useful Post:
 
Page generated in 0.10188 seconds with 7 queries