GSM-Forum - View Single Post - Unbrick LG G4 Brick hs-usb Qdloader 9008 Without Box

**...:::SHAMIM:::...** · 04-05-2017, 06:50

Unbrick LG G4 Brick hs-usb Qdloader 9008

Credit Goes To
Alnajat Soft Team
Engineer
Mohammed Alshikh

Model Supported
H815
H818
H818N
H818P
H819
LS995
LS991
H811

Files Link

LG G4 H811 fix.zip

H810 Fix By QFIL.zip

1. Download
QPST.WIN.2.7-00430-GENERAL

Run setup.exe

Windows [Start] button >> Allprograms >> QPST >> QFIL
installation confirmation

2. Download
Qdload9008_HSUSB_Driver

Install Drivers

3. D / L via QFIL

To force QDloader download mode, connect the FORCED_USB emmc section with a jumper.
Or pressing key combination (volup + voldown) and poweron to boot Emergency D / L mode

After two points in the red circle are shorted and connected by power or USB connection, Qdloadmode can be entered and connected to QFIL

In Emergency D / L mode, check the port in Device Manager after connecting USB -> QS

Windows [Start] button >> All programs >> QPST >> Run QFIL

Select Port
1. Click the "Select Port" button

If you deselect Show Non Diagnostic Port, only the "Diagnostic" or "QDLoader" port will be visible
Selecting the port identified by Device Manager

MBN file selection

2. Click the "Browse" button

Select the file "prog_emmc_firehose_8992_lite_stable.mbn" in the folder where the images are stored.
For fusing samples, use images made for fusing.

ForFusingDevice: For Fusing Devices -> Download to LAF after recovery
NotForFusingDevice: for non-fused devices -> Restore and download

Select Build, RawProgram, Patch Check

Check RawProgram and Patch settings
Check the rawprogram0.xmlpatch0.xml file included
in the -Select Build path.
firehoseprogrammer MBN selected in the same folder
Rawprogram0.xml, patch0.xml are loaded.

SWDownload
4. Click the "Download" button
- The progress bar below is completed and the Download Succeed -> Finish Download message is confirmed.

04-05-2017, 06:50	#1 (permalink)
...:::SHAMIM:::... Moderator Join Date: Oct 2011 Location: U.A.E Posts: 2,356 Member: 1676524 Status: Offline Sonork: 100.1608473 Thanks Meter: 2,713	Unbrick LG G4 Brick hs-usb Qdloader 9008 Without Box Unbrick LG G4 Brick hs-usb Qdloader 9008 Credit Goes To Alnajat Soft Team Engineer Mohammed Alshikh Model Supported H815 H818 H818N H818P H819 LS995 LS991 H811 Files Link LG G4 H811 fix.zip H810 Fix By QFIL.zip 1. Download QPST.WIN.2.7-00430-GENERAL Run setup.exe Windows [Start] button >> Allprograms >> QPST >> QFIL installation confirmation 2. Download Qdload9008_HSUSB_Driver Install Drivers 3. D / L via QFIL To force QDloader download mode, connect the FORCED_USB emmc section with a jumper. Or pressing key combination (volup + voldown) and poweron to boot Emergency D / L mode After two points in the red circle are shorted and connected by power or USB connection, Qdloadmode can be entered and connected to QFIL In Emergency D / L mode, check the port in Device Manager after connecting USB -> QS Windows [Start] button >> All programs >> QPST >> Run QFIL Select Port 1. Click the "Select Port" button If you deselect Show Non Diagnostic Port, only the "Diagnostic" or "QDLoader" port will be visible Selecting the port identified by Device Manager MBN file selection 2. Click the "Browse" button Select the file "prog_emmc_firehose_8992_lite_stable.mbn" in the folder where the images are stored. For fusing samples, use images made for fusing. ForFusingDevice: For Fusing Devices -> Download to LAF after recovery NotForFusingDevice: for non-fused devices -> Restore and download Select Build, RawProgram, Patch Check Check RawProgram and Patch settings Check the rawprogram0.xmlpatch0.xml file included in the -Select Build path. firehoseprogrammer MBN selected in the same folder Rawprogram0.xml, patch0.xml are loaded. SWDownload 4. Click the "Download" button - The progress bar below is completed and the Download Succeed -> Finish Download message is confirmed. Last edited by ...:::SHAMIM:::...; 10-25-2017 at 14:59. Reason: New Link Added!