Changes/improvements made to from v 2005.12.5.90 to v 2005.20.7.98:
-
Support for RH-73, RH-74, RM-56, RM-67, RM-78, RM-79, RM-82, RM-
83, RM-84, RM-89, RM-97, RM-99, RM-115, RM-126 and SU-18
-
New FLS-4S Driver v 2.07
-
New Flash Update Package v 3.29.002
-
RF loss table for autotuning updated for new products.
-
RF AGC Status window can be used for CDMA phones RM-41 and RM-
66.
-
Camera control UI has been improved.
-
Auto focus testing in camera control UI for RM-42 has been added.
-
Transferred image from RM-76 is now deleted.
-
Support for 32bit display types is added.
-
Display test component shows clear error message for not supported
display types.
-
If SW-content in BB5 phone for a different product code will be flashed,
also the product code will be updated (Swap concept).
-
“Full factory set” will be run before flashing for RAE-2, RAE-6 and RAE-4.
-
New phone setting for “MMS postcard destination address” can be
handled.
-
“User Profile save and restore” component is improved.
-
GSM autotune function “TX IQ self tuning” and “RX AM Suppression” is
improved.
-
Autotune start error with Willtek 4400 / Firmware 5.x is corrected
-
Misleading “GPIB address field” is removed from
-
Menu for RM-43 is changed. “Warranty Information”, “Memory Card Test”
and “Ambient Light Sensor Calibration” is removed.
-
Java certificates for RM-19 will be restored after refurbishment.
-
“ESN Reconstruction” is renamed to “IMEI/ESN rebuild” for all protocols.
-
“File System Format” menu is added for RM-74 and RM-75.
-
“TX Power Level Tuning” for RM-74, RM-75 is improved.
-
“Phone Information” function is improved.
-
“RX Calibartion” menu is improved.
-
“Camera Control” now works with NHL-4JX and RH-30
-
“Phoenbook” window for CDMA phones can be resized now.
-
When a CDMA product is closed then the user is prompted to save or not
the PRI or OSA file.
-
CDMA flashing with FPS-4S and FPS-8 is improved.
-
CDMA flashing error “Failed to restore NAM” is fixed.
-
RM-69 display tune works now.
-
RH-51 flashing with FLS-4S is working.
-
Help for FPS-11 flashing is updated and available with F1
-
FPS-11 flashing with slower CPU's for CDMA-flashing and user settings
save/load is limited for 4 ports at the same time
-
FPS-11 flashing problem with user settings is solved.
-
Bigger file sizes are supported now by FPS-11 flashing.
-
RX Calibration for RM-58 is improved.
-
RX calibration window shows AFC values.
-
Phoenix doesn't stuck anymore after closing the connection several times