Hi sir,
I want to read flash file of oppo A57 but i get this message.
Operation : Read Flash [ v1.11 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 435 [MSM8940]
ID_BLOCK_S : 3BB0D700
ID_BLOCK_I : 0006B0E1
ID_BLOCK_L : 3EEC6DDBEFF5849DFEE8EE52FDB4F38E
ID_BLOCK_L : 94AF36338AD0B129C0FD2EDDF140CA41
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HBG4a2
Boot Ok!
DevInfo : MSM89xx
ReportFile : C:\InfinityBox\CM2QLM\QLM_report.log
Send report to mail :
[email protected] with title "QFW" !
Info : Device is not supported yet!
Send log and report.log to support! Include device info also!
Reconnect Power/Cable!
BUT OTHER OPTION GOES WELL.
Operation : Reset Settings [ v1.11 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 435 [MSM8940]
ID_BLOCK_S : 3BB0D700
ID_BLOCK_I : 0006B0E1
ID_BLOCK_L : 3EEC6DDBEFF5849DFEE8EE52FDB4F38E
ID_BLOCK_L : 94AF36338AD0B129C0FD2EDDF140CA41
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HBG4a2
Boot Ok!
Format USER ...
Format CACHE ...
Format Ok!
Done!
Elapsed: 00:00:11
Reconnect Power/Cable!
FRP
Operation : Reset Settings [ v1.11 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 435 [MSM8940]
ID_BLOCK_S : 3BB0D700
ID_BLOCK_I : 0006B0E1
ID_BLOCK_L : 3EEC6DDBEFF5849DFEE8EE52FDB4F38E
ID_BLOCK_L : 94AF36338AD0B129C0FD2EDDF140CA41
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HBG4a2
Boot Ok!
Remove FRP
Reset Ok!
Done!
Elapsed: 00:00:17
Reconnect Power/Cable!
Please as per instruction I have written this post.
Thanks
Br, Raja