GSM-Forum - View Single Post - Some_Details_of_Unsupported_models_by_Cm2mtk ((to improve for update))

mobi_soft · 05-17-2017, 12:59

lenovo a7020a48

this is dead by someone by flshing in spflashtool...i hav backup preloder..but...not flash perfectly

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 68 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : BROM
DRAM configured from IDB!
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM41X
[eMMC] : FLASH_CID : 150100525831344D42079BA5E0436355
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0x2CC2286CBF6A1BCBBFE7CEF861D6832F
INT RAM : 0x00000000
EXT RAM : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : FULL-SPEED
Boot Ok!

Info read not done

Erased/damaged phone?

Done!
Elapsed: 00:00:06
Reconnect Power/Cable!

User selected Preloader file : preloader_k52_a48.bin
Operation : Init Preloader [ v1.58 ]

Supported HW by Preloader :
FlashID [0] CID : 150100523231424D42 , Name : R21BMB , Vendor : 15 , [SAMSUNG]
FlashID [1] CID : 150100523331424142 , Name : R31BAB , Vendor : 15 , [SAMSUNG]
FlashID [2] CID : 90014A484147346132 , Name : HAG4a2 , Vendor : 90 , [HYNIX]
FlashID [3] CID : 90014A484147326505 , Name : HAG2e , Vendor : 90 , [HYNIX]
FlashID [4] CID : 150100513331334D42 , Name : Q313MB , Vendor : 15 , [SAMSUNG]
FlashID [5] CID : 90014A484247346132 , Name : HBG4a2 , Vendor : 90 , [HYNIX]
FlashID [6] CID : 150100525831344D42 , Name : RX14MB , Vendor : 15 , [SAMSUNG]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 627 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM41X
[eMMC] : FLASH_CID : 150100525831344D42079BA5E0436355
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0x2CC2286CBF6A1BCBBFE7CEF861D6832F
INT RAM : 0x00000000
EXT RAM : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

BL : BBID supported by BootLoader!
Supported HW by Preloader :
FlashID [0] CID : 150100523231424D42 , Name : R21BMB , Vendor : 15 , [SAMSUNG]
FlashID [1] CID : 150100523331424142 , Name : R31BAB , Vendor : 15 , [SAMSUNG]
FlashID [2] CID : 90014A484147346132 , Name : HAG4a2 , Vendor : 90 , [HYNIX]
FlashID [3] CID : 90014A484147326505 , Name : HAG2e , Vendor : 90 , [HYNIX]
FlashID [4] CID : 150100513331334D42 , Name : Q313MB , Vendor : 15 , [SAMSUNG]
FlashID [5] CID : 90014A484247346132 , Name : HBG4a2 , Vendor : 90 , [HYNIX]
FlashID [6] CID : 150100525831344D42 , Name : RX14MB , Vendor : 15 , [SAMSUNG]
BL : Storage supported by BootLoader!
Sending BootLoader ...
Init BL #1 : 0001
Init BL #2 : 0001
PartTable Init Failed, Reflashing required!
All Done

Done!
Elapsed: 00:00:09
Reconnect Power/Cable!

Scatter Load Ok , BaseBand : MT6755 , Project : k52_a48 , Storage : EMMC
Files found : 18 , Set to Flash : 17
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 627 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM41X
[eMMC] : FLASH_CID : 150100525831344D42079BA5E0436355
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0x2CC2286CBF6A1BCBBFE7CEF861D6832F
INT RAM : 0x00000000
EXT RAM : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

ScatCFG : BaseBand : MT6755 , Project : k52_a48 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

M67BL : Check eMMC compatibility
M67BL : eMMC supported by BootLoader!

Selected forced PMT update
Build new PMT ...
Update Primary ...
Update Mirror ...
PMT update Ok!

M67BL : Flash Erase
Total blocks to Erase : 5
Erase : 0x0000000000008000-0x0000000001BC0000
Erase : 0x0000000004BC8000-0x0000000004000000
Erase : 0x000000000A000000-0x0000000001000000
Erase : 0x000000000B300000-0x0000000002480000
Erase : 0x000000000DC80000-0x000000033E380000
Flash Erase Done, time used : 00:00:01

Processing : Writing all Flash Files
Flash Partition : PRELOADER
Flash PLC
Image Flash Ok
Flash Partition : RECOVERY
Image Flash Failed!
Something wrong with files or connection!

Operation Failed
Elapsed: 00:00:16
Reconnect Power/Cable!

05-17-2017, 12:59	#2 (permalink)
mobi_soft No Life Poster Join Date: Sep 2009 Location: Hello Online Service Posts: 1,941 Member: 1126941 Status: Offline Sonork: 100.1672154 Thanks Meter: 2,488	lenovo a7020a48 this is dead by someone by flshing in spflashtool...i hav backup preloder..but...not flash perfectly Operation : Check / Read Info [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 68 ] Sync... Inital Boot Ok! BB_CPU_PID : 6755 BB_CPU_NME : [MediaTek] Helio[P10]\|MT6755_S00 BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x01000000 BromVer : 0x0005 BLVersion : 0x00FE PreLoader : NOT Active [ Erased ] BootLdrSS : SIGNED with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... DAgent configured successfully Connection agent : BROM DRAM configured from IDB! Link with DAgent established eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x15 , OEM : 0100 [eMMC] : FLASH_INF : [SAMSUNG] , BM41X [eMMC] : FLASH_CID : 150100525831344D42079BA5E0436355 [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000 [eMMC] : FLASH_LEN : 0x0000000747C00000 [eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB] DEV RID : 0x2CC2286CBF6A1BCBBFE7CEF861D6832F INT RAM : 0x00000000 EXT RAM : 0x80000000 [2 GiB] [NAND] : FLASH : NOT INSTALLED [UFSM] : FLASH : NOT INSTALLED [HSUSB] : MODE : FULL-SPEED Boot Ok! Info read not done Erased/damaged phone? Done! Elapsed: 00:00:06 Reconnect Power/Cable! User selected Preloader file : preloader_k52_a48.bin Operation : Init Preloader [ v1.58 ] Supported HW by Preloader : FlashID [0] CID : 150100523231424D42 , Name : R21BMB , Vendor : 15 , [SAMSUNG] FlashID [1] CID : 150100523331424142 , Name : R31BAB , Vendor : 15 , [SAMSUNG] FlashID [2] CID : 90014A484147346132 , Name : HAG4a2 , Vendor : 90 , [HYNIX] FlashID [3] CID : 90014A484147326505 , Name : HAG2e , Vendor : 90 , [HYNIX] FlashID [4] CID : 150100513331334D42 , Name : Q313MB , Vendor : 15 , [SAMSUNG] FlashID [5] CID : 90014A484247346132 , Name : HBG4a2 , Vendor : 90 , [HYNIX] FlashID [6] CID : 150100525831344D42 , Name : RX14MB , Vendor : 15 , [SAMSUNG] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 627 ] Sync... Inital Boot Ok! BB_CPU_PID : 6755 BB_CPU_NME : [MediaTek] Helio[P10]\|MT6755_S00 BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x01000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : SIGNED with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... DAgent configured successfully Connection agent : PRELOADER DRAM already initialized by Preloader Link with DAgent established eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x15 , OEM : 0100 [eMMC] : FLASH_INF : [SAMSUNG] , BM41X [eMMC] : FLASH_CID : 150100525831344D42079BA5E0436355 [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000 [eMMC] : FLASH_LEN : 0x0000000747C00000 [eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB] DEV RID : 0x2CC2286CBF6A1BCBBFE7CEF861D6832F INT RAM : 0x00000000 EXT RAM : 0x80000000 [2 GiB] [NAND] : FLASH : NOT INSTALLED [UFSM] : FLASH : NOT INSTALLED [HSUSB] : MODE : HIGH-SPEED Boot Ok! BL : BBID supported by BootLoader! Supported HW by Preloader : FlashID [0] CID : 150100523231424D42 , Name : R21BMB , Vendor : 15 , [SAMSUNG] FlashID [1] CID : 150100523331424142 , Name : R31BAB , Vendor : 15 , [SAMSUNG] FlashID [2] CID : 90014A484147346132 , Name : HAG4a2 , Vendor : 90 , [HYNIX] FlashID [3] CID : 90014A484147326505 , Name : HAG2e , Vendor : 90 , [HYNIX] FlashID [4] CID : 150100513331334D42 , Name : Q313MB , Vendor : 15 , [SAMSUNG] FlashID [5] CID : 90014A484247346132 , Name : HBG4a2 , Vendor : 90 , [HYNIX] FlashID [6] CID : 150100525831344D42 , Name : RX14MB , Vendor : 15 , [SAMSUNG] BL : Storage supported by BootLoader! Sending BootLoader ... Init BL #1 : 0001 Init BL #2 : 0001 PartTable Init Failed, Reflashing required! All Done Done! Elapsed: 00:00:09 Reconnect Power/Cable! Scatter Load Ok , BaseBand : MT6755 , Project : k52_a48 , Storage : EMMC Files found : 18 , Set to Flash : 17 Ready to Flash! Operation : Flash [ v1.58 ] ======= Flash 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 627 ] Sync... Inital Boot Ok! BB_CPU_PID : 6755 BB_CPU_NME : [MediaTek] Helio[P10]\|MT6755_S00 BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x01000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : SIGNED with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... DAgent configured successfully Connection agent : PRELOADER DRAM already initialized by Preloader Link with DAgent established eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x15 , OEM : 0100 [eMMC] : FLASH_INF : [SAMSUNG] , BM41X [eMMC] : FLASH_CID : 150100525831344D42079BA5E0436355 [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000 [eMMC] : FLASH_LEN : 0x0000000747C00000 [eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB] DEV RID : 0x2CC2286CBF6A1BCBBFE7CEF861D6832F INT RAM : 0x00000000 EXT RAM : 0x80000000 [2 GiB] [NAND] : FLASH : NOT INSTALLED [UFSM] : FLASH : NOT INSTALLED [HSUSB] : MODE : HIGH-SPEED Boot Ok! ScatCFG : BaseBand : MT6755 , Project : k52_a48 , Storage : EMMC Setting : Flash Pre-Erase (Safe) : Enabled Setting : AFF verify : Enabled Setting : HW verify : Enabled M67BL : Check eMMC compatibility M67BL : eMMC supported by BootLoader! Selected forced PMT update Build new PMT ... Update Primary ... Update Mirror ... PMT update Ok! M67BL : Flash Erase Total blocks to Erase : 5 Erase : 0x0000000000008000-0x0000000001BC0000 Erase : 0x0000000004BC8000-0x0000000004000000 Erase : 0x000000000A000000-0x0000000001000000 Erase : 0x000000000B300000-0x0000000002480000 Erase : 0x000000000DC80000-0x000000033E380000 Flash Erase Done, time used : 00:00:01 Processing : Writing all Flash Files Flash Partition : PRELOADER Flash PLC Image Flash Ok Flash Partition : RECOVERY Image Flash Failed! Something wrong with files or connection! Operation Failed Elapsed: 00:00:16 Reconnect Power/Cable!