Quote:
Originally Posted by TBC01  error 4013/4014 appear to be generic, expected device recovery mode but appeared again in hdfu. Typically I have seen this with oem parts/ battery failure or low power / incorrectly programmed nand as temp ramdisk o/s cant talk to it / nand bridging when fitted / shorted cap... so there is a lot to look at, even a failed nand can cause it!
first thing i do after battery is remove nand and boot in 3utools make sure it switches from hdfu to recovery mode, if its a phone unplug as many ancilliary devices as you can. |
Thanks for your reply. I already changed the battery and disconnected all th unnecessary auxiliaries. nothing changed. My guess would be the NAND too, but at what temp. do you remove it? (another suggestion of one member was the processor?!)
So if I got you right, you are pulling off the NAND and after that you use 3u-tools? Does it work with the free version of 3u too? What exactly are you trying to achieve by rebooting after you removed the NAND? What is supposed to happen?
Thx in advance