View Single Post
Old 05-19-2017, 20:54   #13 (permalink)
galaxycompue
No Life Poster
 
Join Date: Nov 2014
Posts: 844
Member: 2298369
Status: Offline
Thanks Meter: 390
Quote:
Originally Posted by Kirumira View Post
FINALLY I TESTED,PROBLEM WAS POPUP WINDOW MISGUIDING

online photo storage ONLY BOOT KEY WORKS
NOTE: If you HOLD BOTH VOL- & VOL+ keys,phone boots automatically to charging mode,this was working in OLD METHOD OF READ FLASH AFTER ENABLING USB DEBUGGING[ADB MODE]
TESTED ON KIMFLY M2 [VOL + IS BOOT KEY] Here we go;
READ INFO
Code:
Operation : Check/Read Info [ v1.26 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 17 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ... 

Model Name  : t13_x163_bp236_64_4_dt
Model Brand : SPRD
Model Device: t13_x163_bp236_64_4
AndrVersion : 5.1
BaseBand CPU: T13_BOPAI_64_4
CompileDate : 17/11/2016 09:55:58
Project Ver : 20161117
Model Ext   : M2

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:24

Reconnect Power/Cable!
READ FULLFLASH
Code:
Operation : Read FullFlash [ v1.26 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 9 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ... 

Phone found! [ 9 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ... 

Phone found! [ 9 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : t13_x163_bp236_64_4_dt
Model Brand : SPRD
Model Device: t13_x163_bp236_64_4
AndrVersion : 5.1
BaseBand CPU: T13_BOPAI_64_4
Project Ver : 20161117
Model Ext   : M2

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : oem.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2124 MiB
Saved to : C:\Users\KIRUMIRA\Desktop\T13_BOPAI_64_4_t13_x163_bp236_64_4_5.1_20161117_M2\
Done!
Elapsed: 00:18:04
Reconnect Power/Cable!
WRITE BACK READED FIRMWARE AFTER FLASH ERASE
Code:
Infinity SC Firmware Detected
FW Size : 2124 MiB
Load Ok!

File Info
Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand   : SPRD
Device Model   : t13_x163_bp236_64_4
Device CPU     : t13_bopai_64_4
Device IntName : t13_x163_bp236_64_4_dt
Device Version : 5.1
Device Compile : 17/11/2016 09:55:58
Device Project : 20161117
Device ExtInfo : M2

======= Flash
Files set for flashing : 
[ MCU ] : SC77xx Infinity Package

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 17 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!

[FL] : Enabled NVM update. Will program all NVM images found in FW !


PMTManager : Load 0x18 records
PMTManager : PMT Update Ok!
Flashing now

Update BootCode : u-boot-spl-16k.bin
Write Data ... 
Write Data Ok!

Update BootCode : u-boot.bin
Erase block ... 
Block erase Ok!
Write Data ... 
Write Data Ok!

Write FSImage : prodnv.img
Write Data ... 
Write Data Ok!

Write CodeData : sc7731C_CP0_modem.bin
Write Data ... 
Write Data Ok!

Write CodeData : DSP_DM_Gx.bin
Write Data ... 
Write Data Ok!

Update NVM image : nvitem_w.bin
Update NVM Data Ok!

Erase Block : RuntimeData
Erase block ... 
Block erase Ok!

Write CodeData : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
Write Data ... 
Write Data Ok!

Update NVM image : nvitem_wcn.bin
Update NVM Data Ok!

Write CodeData : logo_480x854.bin
Write Data ... 
Write Data Ok!

Write CodeData : fblogo_480x854.bin
Write Data ... 
Write Data Ok!

Write CodeData : boot.img
Write Data ... 
Write Data Ok!

Write FSImage : system.img
Write Data ... 
Write Data Ok!

Write FSImage : oem.img
Write Data ... 
Write Data Ok!

Write FSImage : cache.img
Write Data ... 
Write Data Ok!

Write CodeData : recovery.img
Write Data ... 
Write Data Ok!

Erase Block : MISC
Erase block ... 
Block erase Ok!

Write FSImage : userdata.img
Write Data ... 
Write Data Ok!


Elapsed: 00:04:21

Reconnect Power/Cable!
CONVERT TO PAC
Code:
Operation : Convert InfinitySC to SPRD PAC [ v1.26 ]

Target : T13_BOPAI_64_4_t13_x163_bp236_64_4_5.1_20161117_M2
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731C_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[ADD FILE] : logo_480x854.bin
[ADD FILE] : fblogo_480x854.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : oem.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0018
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:02:13

Saved to : T13_BOPAI_64_4_t13_x163_bp236_64_4_5.1_20161117_M2.pac
Done!

this is true, when software again say to connect only use + or - boot key(this depend on handset), then reading start properly.
  Reply With Quote
 
Page generated in 0.24136 seconds with 6 queries