View Single Post
Old 05-20-2017, 14:48   #18869 (permalink)
kingsoftaz
Freak Poster
 
kingsoftaz's Avatar
 
Join Date: Aug 2013
Age: 33
Posts: 278
Member: 1996171
Status: Offline
Thanks Meter: 74
Repair DRK G925P 6.0.1

Code:
  REPAIR INSTRUCTIONS:
     Activate Diagnostic Port:
  1. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Select device in ADB settings.
  2. Press 'Activate Diag' button. 
    
    Reset EFS, Disable Factory Mode:
    Phone must be rooted!
  If the software can't root the phone automatically, 
  then you must root your device manually.
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Reset EFS' if you need to reset it.
     Be carefully, do not perform this without necessity. Backup will be created automatically.
  6. If you have yellow table on your device screen, then press 'Disable Factory Mode' button.
  
    Wipe EFS/NVM:
   If you have 'IMEI null/null' or 'Phone baseband unknown' errors,
   Then you can try to repair this errors with this function.  
  1. Power on phone in download mode (turn off phone, hold Volume Down + Home + Power).
  2. Connect USB cable, install drivers if needed.
  3. Press 'Wipe EFS/NVM' button to deactivate security.
  4. Wait till phone reboot. 

Operation: Repair DRK
Selected model: SM-G925P
Software version: 28.2

Checking local file... not found
Searching server... Ok
Downloading file... Ok
Checking local file... Ok
Searching USB Flash interface... COM28 detected
Setup connection... Ok
Reading data from phone... Ok
Sending data to phone... Ok
Sending data to phone... Ok
Waiting ADB device... Ok
Reading phone info...
Recovery build version: 6.0.1
Boot version: G925PVPU3BOI1
Platform: exynos7420
Boot serial: 06157df683926328
Product board: zerolte
Initialization zTool... Ok
Running zTool, please wait...
Start... Ok
Initialization... Ok
Generate and check client proof... Ok
Verify proof by client... Ok
Checking DRK status... Ok
Repairing DMVT key... Ok
Rebooting phone... Ok
Repair DRK done

Done with Samsung Tool PRO v.28.2
 
 
Page generated in 0.07773 seconds with 7 queries