View Single Post
Old 06-08-2017, 11:51   #75 (permalink)
naazerkhan
Freak Poster
 
Join Date: Jun 2009
Location: Sky Mobile™
Posts: 433
Member: 1049764
Status: Offline
Sonork: 100.1678585
Thanks Meter: 58
SM-G532G boot repair problem

eMMC_tool Suite ver. 1.0.0.47
Microsoft Windows 7 (32 bit) build 7601 (6.1.7600.16385)

Looking for EasyJTAG box...
EasyJTAG API ver. 2008
Setting IO Levels to 2.8V
Setting frequence to 21 Mhz
HiPower mode is OFF
EasyJTAG Box Serial = 16005015120EF521
Card Serial = AA0E-097C
EasyJTAG Box Firmware = 01.58

Changelog:

28.05.2017 (ver 1.0.0.47)
Fix: Bugs that have been found through your crash report
Fix: Searching for partitions when scanning MBR
Fix: Searching for MassStorage devices
Add: AutoUpdate for the program

HiPower mode is OFF
CMD Pullup Level: 12251 mV
CMD Active Level: 12601 mV
Can't init device. Reason: CMD Timeout Error

HiPower mode is OFF
CMD Pullup Level: 13158 mV
CMD Active Level: 13179 mV
Can't init device. Reason: CMD Timeout Error

HiPower mode is OFF
CMD Pullup Level: 11405 mV
CMD Active Level: 11199 mV
Can't init device. Reason: CMD Timeout Error

HiPower mode is OFF
CMD Pullup Level: 11828 mV
CMD Active Level: 11498 mV
Can't init device. Reason: CMD Timeout Error

emmc repair allways cmd timeout error
https://www.mediafire.com/?naod7j6bh2yozcs

Last edited by layder; 09-11-2018 at 10:14. Reason: change thread name
  Reply With Quote
 
Page generated in 0.14175 seconds with 6 queries