n920t repair imei done REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.
Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on phone in download mode (turn off phone, hold vol.down + Camera + Power).
2. Connect phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button.
Operation: Repair
Selected model: SM-N920T
Software version: 28.2
If you are looking for 'Repair Network' function then you should use 'Patch Certificate'
Waiting ADB device...
Please, allow USB debugging on phone... Ok
Reading phone info...
Model: SM-N920T
Android version: 6.0.1
Product code: SM2N920TZDATMB
Phone version: N920TUVS4DQA2
PDA version: N920TUVS4DQA2
CSC version: N920TTMB4DQA2
CSC country code: USA
CSC sales code: TMB
HW version: REV0.2
Phone SN: RF8GC1H4SAZ
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2017-01-01
RF cal date: 20151224
IMEI:
Checking Super user right... true
Reading NV data... Ok
Checking NV data... Ok
Initialization zTool... Ok
Running zTool, please wait... Ok
HWID: A8 56 80 4F 95 06 00 00 00 00 00 00 00 00 00 00
Calculating... Ok
Repairing... Ok
Writing NV data... Ok
Rebooting phone... Ok
Repair done
Done with Samsung Tool PRO v.28.2 |