| g630-u10 with blank emmc
hi guys i changed my g630 dead emmc with new one with correct boot config and after that flashed with cm2qlm with G630-U10 CM2 Readed By A_1st file but phone still detected with qualcomm driver and dosent turn on here the log:
Card found : 74527347 , v0136
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.13
Loading firmware ...
Load Ok!
Operation : Flash [ v1.13 ]
ForceFlashing : Enabled
Verify FW package ...
Verification passed!
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x12]
ID_BLOCK_S : 031B422C
ID_BLOCK_I : 008140E1
ID_BLOCK_L : B94B21DD78E6131EC9BE56BF78C3537B
ID_BLOCK_L : F68D339A9F06A83DD01F70A9BB4A6467
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000000
Boot Ok!
Flash Chain : 27
Flashing now
Flashing : gpt_main0.bin
Flashing : sbl1.mbn
Flashing : deploy.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : emmc_appsboot.mbn
Flashing : oemdata.bin
Flashing : NON-HLOS.bin
Flashing : fs_gc.img
Flashing : persist.img
Flashing : boot.img
Flashing : recovery.img
Flashing : cust.img
Flashing : cache.img
Flashing : system.img
Flashing : userdata.img
Flashing : gpt_backup0.bin
Boot settings configured!
Flashing done!
Done!
Elapsed: 00:03:28
Reconnect Power/Cable! |