Karbonn Titanium S1Plus (S1+) Read Firmware From Working Cellphone & Write On Dead. Operation : Identify [ v1.14 ] Code:
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x12]
ID_BLOCK_S : 03E80FF3
ID_BLOCK_I : 008140E1
ID_BLOCK_L : F0706A9443AFD4D7B0E56F70BF8A0A42
ID_BLOCK_L : A3D27CCFC053FB088D682D9AE807113A
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000000
Boot Ok!
Brand : Karbonn
ProdName : Karbonn
ProdModel : Titanium S1 Plus
Device : Titanium S1 Plus
AndroidVer: 4.4.2
Manufact. : Karbonn
SysPatch : KVT49L
QLMxCPU : MSM8610
Done!
Elapsed: 00:00:16
Reconnect Power/Cable!
Operation : Read Flash [ v1.14 ] Code:
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x12]
ID_BLOCK_S : 03E80FF3
ID_BLOCK_I : 008140E1
ID_BLOCK_L : F0706A9443AFD4D7B0E56F70BF8A0A42
ID_BLOCK_L : A3D27CCFC053FB088D682D9AE807113A
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000000
Boot Ok!
Brand : Karbonn
ProdName : Karbonn
ProdModel : Titanium S1 Plus
Device : Titanium S1 Plus
AndroidVer: 4.4.2
Manufact. : Karbonn
QLMxCPU : MSM8610
DevInfo : MSM8610__Karbonn__Karbonn__ANDR_v4.4.2__Titanium_S1_Plus__Titanium_S1_Plus
Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : deploy.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : boot.img
[Read Ok] : tz.mbn
[Read Ok] : system.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : misc.img
[Read Ok] : splash.img
[Read Ok] : userdata.img
[Read Ok] : usbdisk.img
[Read Ok] : gpt_backup0.bin
Android Info saved!
Read finished!
Configuration : MSM8x10 / eMMC
Firmware Size : 1105 MiB
Done!
Elapsed: 00:04:14
Reconnect Power/Cable!
Operation : Flash [ v1.14 ] Code:
ForceFlashing : Disabled
Verify FW package ...
Verification passed!
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x12]
ID_BLOCK_S : 00CF5BD3
ID_BLOCK_I : 008140E1
ID_BLOCK_L : D0104AB4238FB4B790C50F10DFAA2A22
ID_BLOCK_L : 8AF947E6EB7AE461645304FDF73E2813
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000000
Boot Ok!
Flash Chain : 24
Flashing now
Flashing : gpt_main0.bin
Flashing : NON-HLOS.bin
Flashing : sbl1.mbn
Flashing : deploy.mbn
Flashing : emmc_appsboot.mbn
Flashing : rpm.mbn
Flashing : boot.img
Flashing : tz.mbn
Flashing : system.img
Flashing : persist.img
Flashing : cache.img
Flashing : recovery.img
Flashing : misc.img
Flashing : splash.img
Flashing : userdata.img
Flashing : usbdisk.img
Flashing : gpt_backup0.bin
BootConfig set to 0x00
Flashing done!
Done!
Elapsed: 00:01:50
Reconnect Power/Cable!