Dear customers,
For complete XTC 2 Power Adapter please visit this thread:
http://forum.gsmhosting.com/vbb/f961...017-a-2233953/
Here is a short manual on how to use the new PowerAdapter, and in the meantime we will prepare videos and photos for this guide.
What do we need?
* XTC 2 Tool version 1.31 and higher from here:
http://forum.gsmhosting.com/vbb/f961...pport-2238267/
* Drivers for PowerAdapter from here:
http://xtc2.net/downloads/driver_poweradapter.zip How to use:
1. Connect XTC 2 PowerAdapter to PC using microUSB cable and install drivers, if not yet installed.
2. Remove smartcard from XTC 2 Clip and insert PowerAdapter instead. Shoul you feel that connection is not tight enough, you may use included stickers to secure the connection.
3. Run XTC 2 Tool and open "PowerAdapter" tab.
4. Connect phone in download mode to PC, and connect XTC 2 Clip to phone's SD slot as for normal S-OFF operation.
5. Process with desired command.
Quote:
|
Overall, the procedure is almost the same like for regular S-OFF from direct mode, except the PowerAdapter connected to the clip & PC.
|
Please note, that XTC 2 Tool 1.31 is still in beta, so should you have any questions/comments - simply let us know ASAP.