Quote:
Originally Posted by maazi  TRYING TO UNLOCJ G955W AND GETTING THIS ERROR HRE IS THELOG
UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
1. Phone must be powered on.
2. Type *#0808# and select 'DM+ACM+ADB'.
3. Run dialer and type *#0*# (service mode will apear).
4. Connect the phone to USB cable, choose correct COM port in port settings.
5. Press 'Unlock' button.
6. Paste MSL code in new opened window and press 'OK'.
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will apear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Read Codes via Server
Selected model: SM-G955W
Software version: 28.6
Checking Login and Password... OK
Balance: 50 crd.
Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-G955W
Android version: 7.0
Product code: SM-G955WZKAVTR
Phone version: G955WVLU1AQDE
PDA version: G955WVLU1AQDE
CSC version: G955WOYA1AQDE
CSC country code: CANADA
CSC sales code: VTR
HW version: REV1.0
Phone SN: R28J33QAV7L
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2017-04-01
RF cal date: 2017.03.31
IMEI:
Rebooting phone... OK
Waiting ADB device...
Please, allow USB debugging on phone... OK
Rebooting phone... OK
Waiting ADB device...
Please, allow USB debugging on phone... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM11 detected
Reading data from phone... error (0)
Done with Samsung Tool PRO v.28.6 |
did you try with older version 28.5?
also try again few times.