thread: why error?
View Single Post
Old 07-09-2017, 09:50   #1 (permalink)
mahi20015
No Life Poster
 
Join Date: Jan 2015
Posts: 3,142
Member: 2325887
Status: Offline
Thanks Meter: 104
Thumbs up why error?

Card found: S/N : 20B8AC71 , v0118
Registered to: hamid200

Connect phone on selected interface...

Core : v2.29 , NXP FlashEngine : v6.0

Flash Mode : Full Update (System, User, Boot)
Check and select files according selected FlashMode

Ok, Set : RM980_1.2.4.3_059T985_IMEA_IN_variant.img
Ok, Set : RM980_1.2.4.3_boot.img
Ok, Set : RM980_1.2.4.3_cache.img
Ok, Set : RM980_1.2.4.3_emmc_appsboot.mbn
Ok, Set : RM980_1.2.4.3_emmc_appsboothd.mbn
Ok, Set : RM980_1.2.4.3_fat.bin
Ok, Set : RM980_1.2.4.3_oemsbl.mbn
Ok, Set : RM980_1.2.4.3_oemsblhd.mbn
Ok, Set : RM980_1.2.4.3_persist.img
Ok, Set : RM980_1.2.4.3_preload.img
Ok, Set : RM980_1.2.4.3_qcsbl.mbn
Ok, Set : RM980_1.2.4.3_qcsblhd_cfgdata.mbn
Ok, Set : RM980_1.2.4.3_recovery.img
Ok, Set : RM980_1.2.4.3_system.img
Ok, Set : RM980_1.2.4.3_udisk.bin
Ok, Set : RM980_1.2.4.3_userdata.img

Dead Mode is Selected
1. Phone should be Off!
2. Press and hold 'Volume Down' button
3. Insert USB cable and hold button, until phone will be detected

Device boot not done
Check Drivers
Try again


Core : v2.29 , NXP FlashEngine : v6.0

Flash Mode : Full Update (System, User, Boot)
Check and select files according selected FlashMode

Ok, Set : RM980_1.2.4.3_059T985_IMEA_IN_variant.img
Ok, Set : RM980_1.2.4.3_boot.img
Ok, Set : RM980_1.2.4.3_cache.img
Ok, Set : RM980_1.2.4.3_emmc_appsboot.mbn
Ok, Set : RM980_1.2.4.3_emmc_appsboothd.mbn
Ok, Set : RM980_1.2.4.3_fat.bin
Ok, Set : RM980_1.2.4.3_oemsbl.mbn
Ok, Set : RM980_1.2.4.3_oemsblhd.mbn
Ok, Set : RM980_1.2.4.3_persist.img
Ok, Set : RM980_1.2.4.3_preload.img
Ok, Set : RM980_1.2.4.3_qcsbl.mbn
Ok, Set : RM980_1.2.4.3_qcsblhd_cfgdata.mbn
Ok, Set : RM980_1.2.4.3_recovery.img
Ok, Set : RM980_1.2.4.3_system.img
Ok, Set : RM980_1.2.4.3_udisk.bin
Ok, Set : RM980_1.2.4.3_userdata.img

Dead Mode is Selected
1. Phone should be Off!
2. Press and hold 'Volume Down' button
3. Insert USB cable and hold button, until phone will be detected


Connect Ok

Get Phone Initial Info
HWDetails : 0x0000 , 0x0000 , 0x0000 , 0x0000
HWDetails : eMMC : VEN , OEM : , NAME :
HWDetails : Failed to identify!
File HW revision is : HW Revision V1

Processing : RM980_1.2.4.3_qcsblhd_cfgdata.mbn
Partition Init Not Done

Flash Error
Break flashing!

Phone disconected!

Connect phone on selected interface...
  Reply With Quote
 
Page generated in 0.21275 seconds with 6 queries