Quote:
Originally Posted by applebricks  Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.13
Operation : Read Flash [ v1.13 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 821 [MSM8996 Pro]
ID_BLOCK_S : AAA2CD57
ID_BLOCK_I : 0005F0E1
ID_BLOCK_E : 2A703DB9
ID_BLOCK_L : 6063F3872A48B996DCCBF417FAAB960F
ID_BLOCK_L : 1324F1C4FFD8A38D0CE6706A227AF73B
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00001000
UFS Device : SAMSUNG KLUCG4J1CB-B0B1 0800
UFS SectSize : 0x1000
UFS LU0 Size : 0x00000007602F0000 : 29.50 GiB
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!
Brand : OnePlus
Device : OnePlus3
AndroidVer: 7.1.1
SWVersion : OnePlus3TOxygen_28.A.54_GLO_054_1706101907
Manufact. : OnePlus
QLMxCPU : MSM8996
DevInfo : MSM8996__OnePlus__OnePlus__ANDR_v7.1.1__OnePlus3__ OnePlus3TOxygen_28.A.54_GLO_054_1706101907
Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : misc.img
[Read Ok] : devcfg.mbn
[Read Ok] : pnvbak.img
[Read Ok] : param.cfg
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
[Read Ok] : gpt_main1.bin
[Read Ok] : xbl.elf
[Read Ok] : gpt_backup1.bin
[Read Ok] : gpt_main2.bin
[Read Ok] : gpt_backup2.bin
[Read Ok] : gpt_main3.bin
[Read Ok] : ddr.bin
[Read Ok] : gpt_backup3.bin
[Read Ok] : gpt_main4.bin
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : sec.dat
[Read Ok] : pmic.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : adspso.bin
[Read Ok] : mdtp.img
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : lsplash.img
[Read Ok] : boot.img
[Read Ok] : boot_ag.img
[Read Ok] : system.img
[Read Ok] : recovery.img
[Read Ok] : btfm.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : cmnlib.mbn
[Read Ok] : cmnlib64.mbn
[Read Ok] : ap.mbn
[Read Ok] : gpt_backup4.bin
[Read Ok] : gpt_main5.bin
[Read Ok] : md5.img
[Read Ok] : gpt_backup5.bin
Android Info saved!
Read finished!
Configuration : MSM8996 / UFS
Firmware Size : 3338 MiB
Done!
Elapsed: 00:02:53
Reconnect Power/Cable! |
CM2 internal loader not work with this pon,then how did you read it,is there any trick? becoz i already tested with more than 10 pones, i think you picked loder from o.g fim, and readed it..