| BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read EFS' button to read backup or 'Write EFS' to restore or
press 'Write CERT' to restore certificates.
To backup/restore QCN, phone diagnostic port must be enabled.
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and select 'DM/DUN over HSIC'.
Or use 'Activate Diag' function from 'Repair' tab.
4. Connect phone to PC with USB cable, install drivers if needed.
5. Select diagnostic port in port settings.
6. Press 'Read QCN' button to read NV backup or 'Write QCN' to restore.
Operation: Write CERT
Selected model: SM-E500H
Selected port: COM340 SAMSUNG Mobile USB Serial Port
Software version: 28.2
Checking CERT file... Ok
KEY ID: 0056
Waiting ADB device... Ok
Reading phone info...
Model: SM-E500H
Android version: 4.4.4
Product code: SM-E500HZKDXFE
Phone version: E500HXXU1AOD1
PDA version: E500HXXU1AOD1
CSC version: E500HOJV1ANL7
CSC country code: SOUTH AFRICA
CSC sales code: XFE
HW version: MP 0.800
Phone SN: RV1G707RXRE
Modem board: MSM8216
RF cal date: 2015.07.07
IMEI: 358484065745618
Writing AT RIL... Ok
Initialization AT RIL... Ok
Bypass MSL... Ok
Checking for compatible phone and cert... Ok
Phone KEY ID: 0056
Writing CERT... Ok
Checking CERT status... Ok
Rebooting phone... Ok
Done with Samsung Tool PRO v.28.2 |