View Single Post
Old 07-21-2017, 15:26   #18745 (permalink)
firose4u
Freak Poster
 
Join Date: May 2008
Location: india
Age: 40
Posts: 126
Member: 776810
Status: Offline
Sonork: 100.1627706
Thanks Meter: 19
s8+ SM-G955U unlock sucsess via read code

UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
1. Phone must be powered on.
2. Type *#0808# and select 'DM+ACM+ADB'.
3. Run dialer and type *#0*# (service mode will apear).
4. Connect the phone to USB cable, choose correct COM port in port settings.
5. Press 'Unlock' button.
6. Paste MSL code in new opened window and press 'OK'.

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will apear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model:
Selected port: COM1 Communications Port
Software version: 28.8.1

Checking Login and Password... OK
Ballance: 50 crd.
Waiting ADB device... OK
Reading phone info...
Model: SM-G955U
Android version: 7.0
Product code: SM-G955UZSAATT
Phone version: G955USQU1AQDE
PDA version: G955USQU1AQDE
CSC version: G955UOYN1AQDE
CSC country code: USA
CSC sales code: ATT
HW version: REV1.0
Phone SN: R38J402W2MX
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2017-04-01
RF cal date: 2017.04.04
IMEI:
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM3 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 84746253
NET lock: 25794182
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.28.8.1
 
The Following User Says Thank You to firose4u For This Useful Post:
 
Page generated in 0.07135 seconds with 7 queries