View Single Post
Old 07-23-2017, 23:15   #11 (permalink)
jmr
No Life Poster
 
Join Date: Oct 2007
Location: Colombia
Posts: 1,740
Member: 614683
Status: Offline
Sonork: 100.1605379
Thanks Meter: 362
all write ok but phone not poweron always qualcom mode

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : Huawei
Model : G8_RIO-L03
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/HUAWEI_G8_RIO-L03_EMMC.srf
Voltage : 3.3V
Bus Mode : 1
Bus speed : Auto

Connecting...
Device : Samsung eMMC R311MB
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : 14.56 GB
---------------------------------------------------------------
CID Info

CID : 150100523331314D42068ECFC28BC259
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : R311MB
Product revision : 0.6
Product serial number : (hex) 8ECFC28B
Manufacturing date : 12/2015
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : 00111000
Boot partition enable : User area (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7626752 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/R311MB_20_07_2017_21_26_32.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.4.0; FW: 1.20.
P00: GPT (00000000, 00000022)
P01: sbl1 (00000022, 00000400)
P02: hyp (00000422, 00000400)
P03: sec (00002000, 00000040)
P04: DDR (00002040, 00000040)
P05: rpm (00004000, 00000400)
P06: tz (00004400, 00000400)
P07: aboot (00004800, 00002780)
P08: pad (00006F80, 00000800)
P09: oeminfo (00007780, 00020000)
P10: misc (00027780, 00002000)
P11: modemst1 (00029780, 00002000)
P12: modemst2 (0002B780, 00002000)
P13: fsg (0002E000, 00002000)
P14: modem (00030000, 00064000)
P15: fsc (00094000, 00000002)
P16: ssd (00094002, 00000010)
P17: log (00094012, 00020000)
P18: persist (000B6000, 00020000)
P19: boot (000D6000, 00020000)
P20: recovery (000F6000, 00020000)
P21: erecovery (00116000, 00020000)
P22: cache (00136000, 00080000)
P23: cust (001B6000, 00100000)
P24: system (002B6000, 00500000)
P25: config (007B6000, 00000400)
P26: userdata (007B8000, 01566FDF)
Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/HUAWEI_G8_RIO-L03_EMMC.srf".
Write data verification is enabled.
Writing GPT partition... Done.
Writing sbl1 partition... Done.
Writing hyp partition... Done.
Writing sec partition... Done.
Writing DDR partition... Done.
Writing rpm partition... Done.
Writing tz partition... Done.
Writing aboot partition... Done.
Writing pad partition... Done.
Writing oeminfo partition... Done.
Writing misc partition... Done.
Writing modemst1 partition... Done.
Writing modemst2 partition... Done.
Writing fsg partition... Done.
Writing modem partition... Done.
Writing fsc partition... Done.
Writing ssd partition... Done.
Writing log partition... Done.
Writing persist partition... Done.
Writing boot partition... Done.
Writing recovery partition... Done.
Writing erecovery partition... Done.
Writing config partition... Done.
  Reply With Quote
 
Page generated in 0.18447 seconds with 6 queries