FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Flash
Selected model: SM-A500F
Software version: 29.1
File analysis... OK
Total file size: 0x8B81CF40 (2232 Mb)
Searching USB Flash interface... COM52 detected
Setup connection... OK
Reading PIT from phone... OK
Sending aboot.mbn... OK
Sending sbl1.mbn... OK
Sending rpm.mbn... OK
Sending tz.mbn... OK
Sending hyp.mbn... OK
Sending NON-HLOS.bin... OK
Sending sec.dat... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img.ext4... OK
Sending modem.bin... OK
Sending cache.img.ext4... OK
Sending hidden.img.ext4... OK
Flashing done (time - 00:07:22)
Done with Samsung Tool PRO v.29.1 |