World First !
Nokia 105 (2017)
TA-1034
Read Info / Reset User Lock Done
Code:
Connect phone on selected interface...
Phone found!
MTKx Nokia Phone detected
Read info... Ok
Reading Phone Info....
Software ver : 10.02.11 00-00-00 TA-1034
IMEI 1 : 3573210842643xx
IMEI 2 : 3573210842643xx
XappVer : 000008F2
Ape Ver : NEMO G 4122fe8d/1 (00000000+0) T Thu Dec 29 01:31:09 2016 U d61db836
PPM : IJ
CNT : N103.10.02.11.p1
Product SN : 15B9F7EBU
Product code : 059Z0X8
Base Prd.code: 059X9M9
Module code : 0207195
Hardware info=======
HWID : 1000
LCDVer: TPO
Lock info ===========
IMEI : 3573210842643xx
IMEI spNet : 3A 75 23 01 48 62 34 32
Conf key : 800000000004000B
Provider key : 2440700000000000
Country : Finland
Operator : NOKIA (Open)
Lock info:
Block 1
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 2
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 3
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 4
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 5
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 6
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 7
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
SimLock status : Ok
Security status : Ok
Done!
Software Info: 10.02.11 00-00-00 TA-1034
IMEI: 3573210842643xx
PPM version : IJ
Product code: 059Z0X8
Rebooting phone to FlashMode...
Wait for phone...
Phone found! [ 140 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0001
BB_CPU_SN : 536F703817DF3C414EA92B0ED672742D
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
BROM/BL stage done
MT626x : Reset User Code
All done! Remove USB cable
All Security Settings deactivated!
Code set to default : 12345
Done!
Connect phone on selected interface...