View Single Post
Old 09-10-2017, 13:49   #44892 (permalink)
rehmani
No Life Poster
 
rehmani's Avatar
 
Join Date: Aug 2006
Location: proud to be an INDIAN Muslim
Age: 35
Posts: 5,175
Member: 333199
Status: Offline
Sonork: may i help u just pm me
Thanks Meter: 2,393
Donate money to this user
intex aqua eco 4g flash done


Code:
Chinese Miracle II  [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 5.x]

Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Insert cable
3. In case of SVC init problems - connect with hold "VolDown" button!

 ====  Wait for phone...

Phone found! [ 80 ]
Port Opened
Sync...
InitSvc Done
Wait for phone...
Sync...
Phone Initial Info : 
Platform : MOCORTM_W15.7.2_Debug
Project  : sharkl_cp1
HWInfo   : sc9830_modem
Phone Security Info : 
IMEI [1] : 3507775aaA91152
IMEI [2] : 3507775bcd00000
BT_ADDR  : 000000000000
SelfInfo : 
BatVoltage : 3.644 V

Done

Reconnect Power/Cable!

Set mode to : SP [SC983x] eMMC [Generic Android 5.x]

Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 
3. Insert cable

 ====  Wait for phone...

Phone found! [ 79 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9830 eMMC Generic Loader v2 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ... 

Model Name  : sp9830aef5mvolteoversea
Model Brand : Aqua_Eco_4G
Model Device: sp9830aef_5m_volte
AndrVersion : 5.1
BaseBand CPU: SP9830AEF_5M_VOLTE
CompileDate : 6/24/2016 4:15:42 AM
Project Ver : Intex_Aqua_Eco_4G_V08_Indian
Model Ext   : Aqua_Eco_4G

ExtraInfo : HWInfo exists!!! This phone have DYNAMIC HW settings!!!

Elapsed: 00:00:42

Reconnect Power/Cable!


Operation : Read NV [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 
3. Insert cable

 ====  Wait for phone...

Phone found! [ 79 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9830 eMMC Generic Loader v2 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read LTEx NV #1

Read Ok , 0x1AC28
Saved to : C:\InfinityBox\CM2SPD\phdata\backup\intex aqua eco 4g sc983x emmc gen and5.x

Elapsed: 00:01:06

Reconnect Power/Cable!


Loading    : Intex_Aqua_Eco_4G_V08_Indian_SER.pac
CRVersion  : BP_R1.0.0
PacCPUinfo : SharkL5ModeMarlinAndroid5.1
PacVersion : Intex_Aqua_Eco_4G_V08_Indian_SER
FastCheck  : 0x004DAE4F43


Operation : Flash [ v1.27 ]

======= Flash
Files set for flashing : 
[ MCU ] : Intex_Aqua_Eco_4G_V08_Indian_SER.pac
CRVersion  : BP_R1.0.0
PacCPUinfo : SharkL5ModeMarlinAndroid5.1
PacVersion : Intex_Aqua_Eco_4G_V08_Indian_SER
File : fdl1.bin
File : fdl2.bin
File : nvitem.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : SC9600_sharkl_5modcsfb_volte.bin
File : LTE_DSP.bin
File : SHARKL_DM_DSP.bin
File : SC9600_sharkl_wphy_5mod_volte.bin
File : PM_sharkl_arm7_dfs.bin
File : fdl1.bin(1)
File : EXEC_KERNEL_IMAGE0.bin
File : boot.img
File : recovery.img
File : system.img
File : oem.img
File : userdata.img
File : logo_wvga_intex.bmp
File : logo_wvga_intex.bmp(1)
File : cache.img
File : u-boot.bin
File : persist.img
File : udc.bin

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 
3. Insert cable

 ====  Wait for phone...

Phone found! [ 79 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
PMTManager : Load 0x27 records
PMTManager : PMT Update Ok!
Flashing now

[FlashProc] : CODE  
Current ID : PRODNV
Current File : prodnv.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : ERASE 
Current ID   : ERASEUBOOT
Current Part : uboot
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID   : SPLLOADER
Current File : u-boot-spl-16k.bin
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : MODEM_WLTE
Current File : SC9600_sharkl_5modcsfb_volte.bin
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : DSP_WLTE_LTE
Current File : LTE_DSP.bin
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : DSP_WLTE_GGE
Current File : SHARKL_DM_DSP.bin
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : WARM_WLTE
Current File : SC9600_sharkl_wphy_5mod_volte.bin
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : DFS
Current File : PM_sharkl_arm7_dfs.bin
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : FDL_WCN
Current File : fdl1.bin(1)
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : MODEM_WCN
Current File : EXEC_KERNEL_IMAGE0.bin
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : BOOT
Current File : boot.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : RECOVERY
Current File : recovery.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : SYSTEM
Current File : system.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : OEM
Current File : oem.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : USERDATA
Current File : userdata.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : BOOTLOGO
Current File : logo_wvga_intex.bmp
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : FASTBOOT_LOGO
Current File : logo_wvga_intex.bmp(1)
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : CACHE
Current File : cache.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : ERASE 
Current ID   : FLASH_WLTE
Current Part : l_runtimenv1
[FlashProc] : Ok!

[FlashProc] : ERASE 
Current ID   : ERASEMISC
Current Part : misc
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID   : UBOOTLOADER
Current File : u-boot.bin
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : PERSIST
Current File : persist.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : UDC_CONFIG
Current File : udc.bin
Flashing now ... 
[FlashProc] : Ok!


Elapsed: 00:02:02

Reconnect Power/Cable!
  Reply With Quote
 
Page generated in 0.14930 seconds with 6 queries