[A.G.Shahid]

QMOBILE X30 READ PATTERN LOCK DONE BY CM2 AND INFERNO TOOL FAILED

>>Current Task:

Read Information(Extend)
>>
>>Operation:

1. Power off the phone.

2. Please insert USB cable within 40 seconds.
>>
>>MediaTek PreLoader USB VCOM (Android) (COM58)
>>
>>Connecting...
>>CPU TYPE:MT6572
>>Hardware version:CA01
>>Software version:0000
>>SecCfgVal :0x00000000
>>BromVersion :0xFF
>>BLVersion :0x01
>>Boot downloading complete!
>>EMMC_ID:0x90014A4834473261110161C676B8627D
>>EMMC_PRODUCT_NAME: 0x483447326111
>>EMMC_BOOT1_SIZE: 0x00400000
>>EMMC_BOOT2_SIZE: 0x00400000
>>EMMC_PRMB_SIZE: 0x00400000
>>EMMC_GP1_SIZE: 0x00000000
>>EMMC_GP2_SIZE: 0x00000000
>>EMMC_GP3_SIZE: 0x00000000
>>EMMC_GP4_SIZE: 0x00000000
>>EMMC_USER_SIZE: 0x0E9000000(3.64 G)
>>
>>INT RAM: 128KB SDRAM EXT RAM: 512MB DRAM
>>Find partition success.
>>
>>Total partition entries found: 19
>>PRELOADER:>>addr:0x000000 -- length:0xC00000
>>MBR:>>addr:0xC00000 -- length:0x080000
>>EBR1:>>addr:0xC80000 -- length:0x080000
>>PRO_INFO:>>addr:0xD00000 -- length:0x300000
>>NVRAM:>>addr:0x1000000 -- length:0x500000
>>PROTECT_F:>>addr:0x1500000 -- length:0xA00000
>>PROTECT_S:>>addr:0x1F00000 -- length:0xA00000
>>SECCFG:>>addr:0x2900000 -- length:0x020000
>>UBOOT:>>addr:0x2920000 -- length:0x060000
>>BOOTIMG:>>addr:0x2980000 -- length:0x600000
>>RECOVERY:>>addr:0x2F80000 -- length:0x600000
>>SEC_RO:>>addr:0x3580000 -- length:0x040000
>>MISC:>>addr:0x35C0000 -- length:0x080000
>>LOGO:>>addr:0x3640000 -- length:0x300000
>>EXPDB:>>addr:0x3940000 -- length:0xA00000
>>ANDROID:>>addr:0x4340000 -- length:0x3D400000
>>CACHE:>>addr:0x41740000 -- length:0xE200000
>>USRDATA:>>addr:0x4F940000 -- length:0x98DC0000
>>BMTPOOL:>>addr:0xFFFF00A8 -- length:0x1500000
>>
>>BasicInfo :
>>Brand : TINNO
>>ProdName : QMobile X30
>>ProdModel : QMobile X30
>>Device : QMobile X30
>>AndroidVer: 4.4.2
>>MTK CPU : MT6572
>>MTK PRJ : ALPS.KK1.MP7.V1
>>Display ID: ALPS.KK1.MP7.V1
>>Board ID : s4050ap
>>Build Date: Mon May 4 14:50:25 CST 2015
>>Custom Build Ver: QMobile_X30_MP_4.4_QMB_13_05
>>Internal Build Ver: S4050AP_MP_4.4_QMB_PK_13_11
>>
>>Read phone info OK.

>>Elapsed time: 00:00:16.


>>Current Task:

Read Pattern Lock
>>
>>Operation:

1. Power off the phone.

2. Please insert USB cable within 40 seconds.
>>
>>MediaTek PreLoader USB VCOM (Android) (COM58)
>>
>>Connecting...
>>CPU TYPE:MT6572
>>Hardware version:CA01
>>Software version:0000
>>SecCfgVal :0x00000000
>>BromVersion :0xFF
>>BLVersion :0x01
>>Boot downloading complete!
>>EMMC_ID:0x90014A4834473261110161C676B8627D
>>EMMC_PRODUCT_NAME: 0x483447326111
>>EMMC_BOOT1_SIZE: 0x00400000
>>EMMC_BOOT2_SIZE: 0x00400000
>>EMMC_PRMB_SIZE: 0x00400000
>>EMMC_GP1_SIZE: 0x00000000
>>EMMC_GP2_SIZE: 0x00000000
>>EMMC_GP3_SIZE: 0x00000000
>>EMMC_GP4_SIZE: 0x00000000
>>EMMC_USER_SIZE: 0x0E9000000(3.64 G)
>>
>>INT RAM: 128KB SDRAM EXT RAM: 512MB DRAM
>>Find partition success.
>>Backup file failed.
>>Read pattern file Failed, the program has terminated.

>>Read pattern lock failed.

Read Phone Info

Read Pattern Lock

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 58 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473261110161C676B8627D
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A4834473261110161C676B8627D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0x0B9C44DEED828644EB6436D2DEFA1F07
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : TINNO
ProdName : QMobile X30
ProdModel : QMobile X30
Device : QMobile X30
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.KK1.MP7.V1

MODEM :
BaseBand : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V36_P4_1_wg_n

EXTRA :
LCD [0] : ili9806e_wvga_dsi_vdo_txd
LCD [1] : nt35512_wvga_dsi_vdo_dj
LCD Res : 800x480
TOUCH [0] : ft6336
TOUCH [1] : ektf2k
CAM [0] : sp2519_yuv
CAM [1] : hi257_yuv
CAM [2] : sp0a19_yuv
MODEM : mt6572_s4050ap_htx_hspa_pk
LOCALE : en_US es_ES zh_CN zh_TW ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG ur_PK fa_IR th_TH pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ iw_IL my_MM km_KH ko_KR pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hdpi -sw600dp -sw720dp

Done!
Elapsed: 00:00:17
Reconnect Power/Cable!


Operation : Read Pattern/DP Lock [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 58 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473261110161C676B8627D
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A4834473261110161C676B8627D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0x0B9C44DEED828644EB6436D2DEFA1F07
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading data ...

Get Locks ...
PatternLock Sequnce : 741259

Done!
Elapsed: 00:00:15
Reconnect Power/Cable!

Br
Shahid