Operation : Identify [ v1.00 ]
Code:
Operation : Identify [ v1.00 ]
----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!
Wait for device ...
Device Connected!
BOOT_PWR0 : 0x00200000
BOOT_INIT : 0x29F47A5B
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A250
Boot done!
Identify : Code Integrity Check pass!
Device Info Details :
[0] : SC6533
[1] : 8809
[2] : 8809e2
[3] : CT8851C
[4] : pasw_hs8292u
[5] : flsh_spi32m
[6] : nv3029f/nv3029g/st7789/gc9305/ili9325
[7] : byd3A01/gc6133/gc6123/sp0820
[8] : rdabt_8809
[9] : rdafm_8809e
[10] : release
[11] : 2017-05-25_20:28:12
[12] : HA001_240320_HZX_3310_GOODLUCK_EnFrPeArUr_R48823
Done!
Elapsed: 00:00:22
Reconnect Power/Cable!
Code:
Identify : Code Integrity Check pass!
Device Info Details :
[0] : SC6533
[1] : 8809
[2] : 8809e2
[3] : CT8851C
[4] : pasw_hs8292u
[5] : flsh_spi32m
[6] : nv3029f/nv3029g/st7789/gc9305/ili9325
[7] : byd3A01/gc6133/gc6123/sp0820
[8] : rdabt_8809
[9] : rdafm_8809e
[10] : release
[11] : 2017-05-25_20:28:12
[12] : HA001_240320_HZX_3310_GOODLUCK_EnFrPeArUr_R48823
Done!
Elapsed: 00:00:22
Reconnect Power/Cable!
Operation : Reset Settings [ v1.00 ]
----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!
Wait for device ...
Device Connected!
BOOT_PWR0 : 0xFFFFFFFF
Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Reset Settings [ v1.00 ]
----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!
Wait for device ...
Device Connected!
BOOT_PWR0 : 0x00200000
BOOT_INIT : 0x29F4FA5B
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A250
Boot done!
Preparing PMT
Verifying PMT
Erasing 1474560 bytes
FileSystem format done!
Done!
Elapsed: 00:00:09
Reconnect Power/Cable!