HAI, good day
found bug when writing emmc firmware for KMNJS, then CID is changed to KMKJS automatically, bug appears in 1.4.1 and also 1.4.2, so i need to manually set CID to KMNJS
here the log:
Connecting...
Device : Samsung eMMC NJS00M
Page size : 512 B
Block size : 512 B
Block count : 7626752
Size : 3724.00 MB
---------------------------------------------------------------
CID Info
CID : 1501004E4A5330304D00749577B070F3
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : NJS00M
Product revision : 0.0
Product serial number : (hex) 749577B0
Manufacturing date : 07/2013
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFE78A404057
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 128 Kbytes
Partition config : 00000000
Boot partition enable : Device not boot enabled (default) (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1904640 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/NJS00M_22_09_2017_09_27_18.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.4.2; FW: 1.20.
Writing eMMC firmware from file: C:/Program Files/Medusa Pro Software/EMMC_firmwares/KMNJS000ZM-B205/KMNJS000ZM-B205_FW.bin...Done.
Finalizing...Done.
Changing CID to 1501004B4A5330304D002011022100B5.
Write CID succesfully completed.
Disconnected.
EMMC writing firmware done.
SW: 1.4.2; FW: 1.20.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 4
Bus speed : Auto
Connecting...
Device :
Samsung eMMC KJS00M
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 1501004B4A5330304D002011022100B5
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : KJS00M
Product revision : 0.0
Product serial number : (hex) 20110221
Manufacturing date : 00/2013
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFE78A404057
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 512 Kbytes
Boot1 size : 1024 Kbytes
Boot2 size : 1024 Kbytes
RPMB size : 128 Kbytes
Partition config : 00000000
Boot partition enable : Device not boot enabled (default) (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/KJS00M_22_09_2017_09_27_50.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.4.2; FW: 1.20.
Changing CID to 1501004E4A5330304D002011022194B5.
Write CID succesfully completed.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 4
Bus speed : Auto
Connecting...
Device : Samsung eMMC NJS00M
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 1501004E4A5330304D002011022194C7
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : NJS00M
Product revision : 0.0
Product serial number : (hex) 20110221
Manufacturing date : 09/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFE78A404057
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 512 Kbytes
Boot1 size : 1024 Kbytes
Boot2 size : 1024 Kbytes
RPMB size : 128 Kbytes
Partition config : 00000000
Boot partition enable : Device not boot enabled (default) (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/NJS00M_22_09_2017_09_30_25.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.4.2; FW: 1.20.
one more request for TEAM, fully added emmc firmware is urgently required, hope TEAM can fullfill it
