NOTO xt1676 frp done with cm2 Card found : D7B16368 , v0136
Infinity-Box Android Service Tool [AST] v1.01
Operation : Enable ADB (Moto) [ v1.01 ]
Waiting for NetInterface arrival ...
1. Power off device. Press and hold 'VOL DOWN' and 'POWER ON' buttons
2. Select by 'VOL DOWN' or 'VOL UP' FACTORY MODE , press 'POWER ON'
3. Connect USB cable, when device boot complete!
Device not found! Check cable, drivers and conection!
Operation : Enable ADB (Moto) [ v1.01 ]
Waiting for NetInterface arrival ...
1. Power off device. Press and hold 'VOL DOWN' and 'POWER ON' buttons
2. Select by 'VOL DOWN' or 'VOL UP' FACTORY MODE , press 'POWER ON'
3. Connect USB cable, when device boot complete!
Connect Ok!
Waiting ...
Trying link with : 192.168.137.2
Connected to device!
Device : XT1676
VerInfo : CEDRIC_EMEADSDS_CUST
Version : Blur_Version.25.11.13.cedric.retail.en.US
Enabling ADB ...
1. Disconnect cable from device, press and hold 'VOLUME_DOWN' and 'POWER_ON'
2. Select 'FACTORY MODE' and press 'POWER ON'!
3. Wait for device boot completely!
Done!
Elapsed: 00:00:49
Operation : Reset FRP (ADB) [ v1.01 ]
Waiting for device in ADB mode ...
1. Connect device, enable 'DEVELOPER MODE' and 'USB DEBUG', if need!
2. Insert USB cable, accept AUTH on PhoneScreen, if software ask!
Connect Ok!
Device : cedric
Model : Moto G (5)
FRP reset passed! Make FACTORY RESET from menu!
Done!
Elapsed: 00:00:16 |