Quote:
Originally Posted by CS-Tool meizu need mtk usb Kernel port to connect the phone, not preloader port, please try to.connect the phone with holding vol - or vol + or both |
Yes, you are right vol- down successful connection
Action : Read Info Code:
Brand: Meizu
Model: Common (MTK)
Tips:
1.Remove Battery, Insert usb cable, Insert battery
2.power off Phone, Remove & Reinsert Battery , insert USB Cable
(In Case Some Phone Required to hold bootkey)
Waiting for Phone Usb...
Phone found [ USB Port:COM32 ]
Connecting...
Connection Done.
Read CPU Info...
CPU_SW: 0001
CPU_HW: CB00
CPU_ID: 0326[MT6755]
SecConf: 00000007
Decryping(Meizu)...ok
uploading boot image to RAM...
Handshake received from Phone.
Getting connection agent status:brom
Init DRAM...
Waiting for DRAM detection...
Selected: 1/0 ...OK
Send boot2 ...
Receive SYNC signal, Boot2 runs normally.
Getting RAM info ...
SRAM: type[0x2] base_address[0x200000] size[0x40000]
DRAM: type[0x1] base_address[0x40000000] size[0x80000000]
Getting H/W info ...
CHIP : MT6755/6750
CPU ID :
EMMC ID : 150100514531334D4207FAC5681993BF
EMMC Size: 16GB, usable capacity: 14,57GB
EMMC Name: eMMC_Samsung_QE13MB
Boot Information completed.
Reading Project Property ...
Brand : Meizu
Phone Model : M5
Access Model : Meizu_M1611_Meizu
Android Ver : 6.0
CPU/Processor : MT6755
MTK Project ver: alps-mp-m0.mp7-V2.3.1_gr6750.66.a.m_P26
SW Version : Flyme 5.2.10.0Y
Action completed
Time taken : 00:00:32
Reconnect Battery/USB Cable
CS-Tool Ver 1.33
Action : Read Flash Code:
Brand: Meizu
Model: Common (MTK)
Tips:
1.Remove Battery, Insert usb cable, Insert battery
2.power off Phone, Remove & Reinsert Battery , insert USB Cable
(In Case Some Phone Required to hold bootkey)
Waiting for Phone Usb...
Phone found [ USB Port:COM32 ]
Connecting...
Connection Done.
Read CPU Info...
CPU_SW: 0001
CPU_HW: CB00
CPU_ID: 0326[MT6755]
SecConf: 00000007
Decryping(Meizu)...ok
uploading boot image to RAM...
Handshake received from Phone.
Getting connection agent status:brom
Init DRAM...
Waiting for DRAM detection...
Selected: 1/0 ...OK
Send boot2 ...
Receive SYNC signal, Boot2 runs normally.
Getting RAM info ...
SRAM: type[0x2] base_address[0x200000] size[0x40000]
DRAM: type[0x1] base_address[0x40000000] size[0x80000000]
Getting H/W info ...
CHIP : MT6755/6750
CPU ID :
EMMC ID : 150100514531334D4207FAC5681993BF
EMMC Size: 16GB, usable capacity: 14,57GB
EMMC Name: eMMC_Samsung_QE13MB
USB STATUS: full-speed
usb switching to high speed ...
New Port: COM123 ......ok
Reading Project Property ...
done.
Dumping Flash Image Now(without user data)...
Dumping Flash Image Completed.
Flash Image size : 3770,00MB
Saved to: C:\Users\TIMUR\Desktop\MT6755_Meizu_M5_16GB_Meizu_M1611_Meizu_Android6.0_Flyme 5.2.10.0Y_20171001_
103507.cst
Action completed
Time taken : 00:02:33
Reconnect Battery/USB Cable
CS-Tool Ver 1.33
Action : Read NVRAM(DwonloadMode) Code:
Brand: Meizu
Model: Common (MTK)
Tips:
1.Remove Battery, Insert usb cable, Insert battery
2.power off Phone, Remove & Reinsert Battery , insert USB Cable
(In Case Some Phone Required to hold bootkey)
Waiting for Phone Usb...
Phone found [ USB Port:COM32 ]
Connecting...
Connection Done.
Read CPU Info...
CPU_SW: 0001
CPU_HW: CB00
CPU_ID: 0326[MT6755]
SecConf: 00000007
Decryping(Meizu)...ok
uploading boot image to RAM...
Handshake received from Phone.
Getting connection agent status:brom
Init DRAM...
Waiting for DRAM detection...
Selected: 1/0 ...OK
Send boot2 ...
Receive SYNC signal, Boot2 runs normally.
Getting RAM info ...
SRAM: type[0x2] base_address[0x200000] size[0x40000]
DRAM: type[0x1] base_address[0x40000000] size[0x80000000]
Getting H/W info ...
CHIP : MT6755/6750
CPU ID :
EMMC ID : 150100514531334D4207FAC5681993BF
EMMC Size: 16GB, usable capacity: 14,57GB
EMMC Name: eMMC_Samsung_QE13MB
Reading Project Property ...
done.
Reading nv ...
NV backup is done.
Save as:
C:\CS-Tool\CST_SM_Module\backup\NV__MT6755_Meizu_M5_Android6.0_Flyme 5.2.10.0Y_20171001_104618.cst
Action completed
Time taken : 00:00:46
Reconnect Battery/USB Cable
CS-Tool Ver 1.33
Action : Write Flash Code:
Brand: Meizu
Model: Common (MTK)
Tips:
1.Remove Battery, Insert usb cable, Insert battery
2.power off Phone, Remove & Reinsert Battery , insert USB Cable
(In Case Some Phone Required to hold bootkey)
Waiting for Phone Usb...
Phone found [ USB Port:COM32 ]
Connecting...
Connection Done.
Read CPU Info...
CPU_SW: 0001
CPU_HW: CB00
CPU_ID: 0326[MT6755]
SecConf: 00000007
Decryping(Meizu)...ok
uploading boot image to RAM...
Handshake received from Phone.
Getting connection agent status:brom
Init DRAM...
Waiting for DRAM detection...
Selected: 1/0 ...OK
Send boot2 ...
Receive SYNC signal, Boot2 runs normally.
Getting RAM info ...
SRAM: type[0x2] base_address[0x200000] size[0x40000]
DRAM: type[0x1] base_address[0x40000000] size[0x80000000]
Getting H/W info ...
CHIP : MT6755/6750
CPU ID :
EMMC ID : 150100514531334D4207FAC5681993BF
EMMC Size: 16GB, usable capacity: 14,57GB
EMMC Name: eMMC_Samsung_QE13MB
USB STATUS: full-speed
usb switching to high speed ...
New Port: COM123 ......ok
Load File : C:\Users\TIMUR\Desktop\MT6755_Meizu_M5_16GB_Meizu_M1611_Meizu_Android6.0_Flyme 5.2.10.0Y_20171001_
103507.cst
Image Size: 0x00000000EBA02000
Programming Flash Image...
Programming Flash Image Completed.
Action completed
Time taken : 00:02:32
Reconnect Battery/USB Cable
CS-Tool Ver 1.33