View Single Post
Old 10-10-2017, 14:49   #102 (permalink)
turkcellgsm
No Life Poster
 
turkcellgsm's Avatar
 
Join Date: Nov 2006
Location: Türkiye
Posts: 1,284
Member: 395431
Status: Offline
Thanks Meter: 439
Quote:
Originally Posted by ghr View Post
nokia 3310 suported or not
yes supported read write flash format ok . write ime Infinity-Box Chinese Miracle II SCR (SPD/RDA ServiceTool) v1.00 - SC6533G support

Quote:
Card found : xxxxx , v0136
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.00


Operation : Identify [ v1.00 ]

----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00600000
BOOT_INIT : 0x81C0024C
BOOT_MODE : DOWNLOAD
BOOT_INTV : 6533G-FPTRUNK-W16.44.2
InternalVersion: g8bec5c4c
Setting BOOTROM mode
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A250
Boot done!

Identify : Code Integrity Check pass!

Device Info Details :
[0] : SC6533
[1] : 8809
[2] : 8809e2
[3] : CT8851C
[4] : pasw_hs8292u
[5] : flsh_spi32m
[6] : nv3029f/nv3029g/st7789/gc9305/ili9325
[7] : byd3A01/gc6133/gc6123/sp0820
[8] : rdabt_8809
[9] : rdafm_8809e
[10] : release
[11] : 2017-06-19_15:43:13
[12] : HA001_240320_HZX_3310_GOODLUCK_TuEnFrPoArPe_R50157

Done!
Elapsed: 00:01:59

Reconnect Power/Cable!

Operation : Read Flash [ v1.00 ]

----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x000000F1
BOOT_INIT : 0x00600000
BOOT_MODE : UNKNOWN

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read Flash [ v1.00 ]

----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00600000
BOOT_INIT : 0x81C0024C
BOOT_MODE : DOWNLOAD
BOOT_INTV : 6533G-FPTRUNK-W16.44.2
InternalVersion: g8bec5c4c
Setting BOOTROM mode
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A250
Boot done!

Read done, 0x00400000

Verify FlashContent
MCU verified
CAL verified
FAC verified

Device Info Details :
[0] : SC6533
[1] : 8809
[2] : 8809e2
[3] : CT8851C
[4] : pasw_hs8292u
[5] : flsh_spi32m
[6] : nv3029f/nv3029g/st7789/gc9305/ili9325
[7] : byd3A01/gc6133/gc6123/sp0820
[8] : rdabt_8809
[9] : rdafm_8809e
[10] : release
[11] : 2017-06-19_15:43:13
[12] : HA001_240320_HZX_3310_GOODLUCK_TuEnFrPoArPe_R50157

Saved to : C:\Users\uzmanbilir1\Desktop\
Saved as : SC6533G_4MiB_SC6533_HA001_240320_HZX_3310_GOODLUCK _TuEnFrPoArPe_R50157_2017-06-19_154313.ilod


Done!
Elapsed: 00:01:29

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to turkcellgsm For This Useful Post:
 
Page generated in 0.14489 seconds with 6 queries