FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. If you have one file firmware, then you must check 'Use one package file' option.
4. Check flashing options if needed (Repartition, EFS clear, Boot update).
5. Power on the phone in download mode (turn off phone, hold Volume Down + Home + Power).
6. Connect the phone to PC with USB cable, install drivers if needed.
7. Press 'Flash' button.
Operation: Flash
Selected model: GT-S5830I
Software version: 29.5
File analysis... OK
Total file size: 0xBE1751A4 (3041 Mb)
Searching USB Flash interface... COM204 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending preloader.img... OK
Sending lk.bin... OK
Sending param.bin... OK
Sending trustzone.bin... OK
Sending efuse.img... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img... OK
Sending secro.img... OK
Sending userdata.img... OK
Sending md1rom.img... OK
Sending md1dsp.img... OK
Sending cache.img... OK
Sending hidden.img... OK
Flashing done (time - 00:02:35)
Done with Samsung Tool PRO v.29.5 |