[FullFlashPak]

What's new in VolcanoBox Inferno UniTool 1.4.1

• Added New way to Manage Custom Partition by Logical Block Address for Advance Users only !!
• Added Erase for Huawei E8372h-153 -> 21.313.xx.xx.306
• Fixed some VIVO phones not detecting by selecting Auto cpu.

How to Unlock Huawei Modems with Inferno ?

• Open Inferno UniTool 1.4.1
• Go to Huawei -> Modem
• Connect Huawei Modem in usb

1. in Normal mode

• Click on Read info.

1. make sure you have installed Correct Drivers

• Check software ver inside your modem.
• go to back and select Erase and then select carefully your Modem model & Firmware ver

1. Firmware ver you checked from Read Info.
2. Check List Below which Modem & Ver Required Erase

• Connect Test Point

1. Check List Below which Modem & Ver Required Testpoint
2. you can download all Test Points from here ****************************/folder/ysz...ems_Test_point
3. Make Sure in Device Manger have one Huawei port !!

• Write Huawei Modem Port number into Unitool Erase windows and click on next. it will Erase successfully.

1. it will automatically reboot after successfully Erased
2. in device manager it will show 2 ports after successfully Erased.

• Go to Huawei -> Modem -> Patch flash -> Select Modem Model & Firmware ver

1. Select Same Modem & Firmware ver which you selected while Erasing & which was in modem before erase.
2. click on Next and let it patch flash.

• After Patch Flash success, please look at list what operation needed for POST PATCH Flash.

1. Some Modems need to Unlock by Inferno Unitool Unitool. V4 Unlock button. after patch flash
2. Some modems need to repair Imei by Inferno UniTool
3. Some modems need to Code calculate.
4. You must update your modem Firmware to LATEST Firmware to run super fine.
5. Make sure you Repair Wifi
6. Kindly have a look at list below for each modems model.

• You have to Download HWModem.sys and Place into Inferno Unitool Folder

Complete Details of each ver & steps you have to do while unlock

• Model: E5330s-B2
  
  • Supported Ver: 21.210.21.xx.274
    
  • Test Point: No
    
  • Erase: No
    
  • Patch Flash: Yes
    
  • Unlock Command: No Need
    
  • Imei Repair Command: No Need
    
  • Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
  
  

• Model: E5330s-B2
  
  • Supported Ver: 21.210.21.xx.306
    
  • Test Point: No
    
  • Erase: No
    
  • Patch Flash: Yes
    
  • Unlock Command: No Need
    
  • Imei Repair Command: No Need
    
  • Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
  
  

• Model: E5330s-B2
  
  • Supported Ver: 21.210.21.xx.1065
    
  • Test Point: No
    
  • Erase: No
    
  • Patch Flash: Yes
    
  • Unlock Command: No Need
    
  • Imei Repair Command: No Need
    
  • Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
  
  

• Model: E5330s-B2
  
  • Supported Ver: 21.210.25.xx.274
    
  • Test Point: Yes
    
  • Erase: Yes
    
  • Patch Flash: Yes
    
  • Unlock Command: No Need
    
  • Imei Repair Command: No Need
    
  • Note: Make Patch Flash Twice
  • Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
  
  

• Model: E5330s-B2
  
  • Supported Ver: 21.210.25.xx.306
    
  • Test Point: Yes
    
  • Erase: Yes
    
  • Patch Flash: Yes
    
  • Unlock Command: No Need
    
  • Imei Repair Command: No Need
    
  • Note: Make Patch Flash Twice
  • Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
  
  

• Model: E5330s-B2
  
  • Supported Ver: 21.210.25.xx.1065
    
  • Test Point: Yes
    
  • Erase: Yes
    
  • Patch Flash: Yes
    
  • Unlock Command: No Need
    
  • Imei Repair Command: No Need
    
  • Note: Make Patch Flash Twice
  • Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
  
  

• Model: E8231-S1
  
  • Supported Ver: 22.618.13.xx.274
    
  • Test Point: No
    
  • Erase: No
    
  • Patch Flash: Yes
    
  • Unlock Command: No Need
    
  • Imei Repair Command: No Need
    
  • Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
  
  

• Model: E8231-S1
  
  • Supported Ver: 22.618.13.xx.1065
    
  • Test Point: No
    
  • Erase: No
    
  • Patch Flash: Yes
    
  • Unlock Command: No Need
    
  • Imei Repair Command: No Need
    
  • Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
  
  

• Model: E8231-S1
  
  • Supported Ver: 22.618.13.xx.306
    
  • Test Point: No
    
  • Erase: No
    
  • Patch Flash: Yes
    
  • Unlock Command: No Need
    
  • Imei Repair Command: No Need
    
  • Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
  
  

• Model: E8231-S1
  
  • Supported Ver: 22.618.17.xx.274
    
  • Test Point: Yes
    
  • Erase: Yes
    
  • Patch Flash: Yes
    
  • Unlock Command: No Need
    
  • Imei Repair Command: No Need
    
  • Note: Make Patch Flash Twice
  • Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
  
  

• Model: E8231-S1
  
  • Supported Ver: 22.618.17.xx.1065
    
  • Test Point: Yes
    
  • Erase: Yes
    
  • Patch Flash: Yes
    
  • Unlock Command: No Need
    
  • Imei Repair Command: No Need
    
  • Note: Make Patch Flash Twice
  • Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
  
  

• Model: E8231-S1
  
  • Supported Ver: 22.618.17.xx.306
    
  • Test Point: Yes
    
  • Erase: Yes
    
  • Patch Flash: Yes
    
  • Unlock Command: No Need
    
  • Imei Repair Command: No Need
    
  • Note: Make Patch Flash Twice
  • Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
  
  

• Model: E5573cs-609
  
  • Supported Ver: 21.318.xx.xx.274
    
  • Test Point: Yes
    
  • Erase: Yes
    
  • Patch Flash: Yes
    
  • Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    
  • Imei Repair Command: No Need
    
  • Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.
    
  
  

• Model: E5573cs-609
  
  • Supported Ver: 21.323.00.00.274
    
  • Test Point: Yes
    
  • Erase: Yes
    
  • Patch Flash: Yes
    
  • Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    
  • Imei Repair Command: No Need
    
  • Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.
  
  

• Model: E8372H-608
  
  • Supported Ver: 21.316.01.01.274
    
  • Test Point: Yes
    
  • Erase: Yes
    
  • Patch Flash: Yes
    
  • Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    
  • Imei Repair Command: No Need
    
  • Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.
    
  
  

• Model: E8372H-608
  
  • Supported Ver: 21.316.01.02.274
    
  • Test Point: Yes
    
  • Erase: Yes
    
  • Patch Flash: Yes
    
  • Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    
  • Imei Repair Command: No Need
    
  • Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.
    
  
  

• Model: E8372H-608
  
  • Supported Ver: 21.316.01.03.274
    
  • Test Point: Yes
    
  • Erase: Yes
    
  • Patch Flash: Yes
    
  • Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    
  • Imei Repair Command: No Need
    
  • Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.
    
  
  

• Model: E8372H-608
  
  • Supported Ver: 21.316.01.04.274
    
  • Test Point: Yes
    
  • Erase: Yes
    
  • Patch Flash: Yes
    
  • Unlock Command: No Need
    
  • Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
    
  • Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"
    
  
  

• Model: E5573cs-322
  
  • Supported Ver: 21.318.xx.xx.306
    
  • Test Point: Yes
    
  • Erase: Yes
    
  • Patch Flash: Yes
    
  • Unlock Command: No Need
    
  • Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
    
  • Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"
    
  
  

• Model: E5573cs-322
  
  • Supported Ver: 21.323.xx.xx.306
    
  • Test Point: Yes
    
  • Erase: Yes
    
  • Patch Flash: Yes
    
  • Unlock Command: No Need
    
  • Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
    
  • Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"
  
  

• Model: E8372h-153
  
  • Supported Ver: 21.313.xx.xx.306
    
  • Test Point: YES
    
  • Erase: Yes
    
  • Patch Flash: Yes
    
  • Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    
  • Imei Repair Command: No Need
    
  • Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & Update Firmware to which has in modem.
  
  

• Model: E8372h-153
  
  • Supported Ver: 21.318.xx.xx.306
    
  • Test Point: Yes
    
  • Erase: Yes
    
  • Patch Flash: Yes
    
  • Unlock Command: No Need
    
  • Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
    
  • Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"
  
  

• Model: E8372h-153
  
  • Supported Ver: 21.321.xx.xx.306
    
  • Test Point: Yes
    
  • Erase: Yes
    
  • Patch Flash: Yes
    
  • Unlock Command: No Need
    
  • Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
    
  • Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"
  
  

• Model: E5573s-320
  
  • Supported Ver: 21.315.01.00.306
    
  • Test Point: No
    
  • Erase: No
    
  • Patch Flash: Yes
    
  • Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    
  • Imei Repair Command: No Need
    
  • Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & Update Firmware to which has in modem.
  
  

• Model: E5573s-320
  
  • Supported Ver: 21.315.01.01.306
    
  • Test Point: Yes
    
  • Erase: Yes
    
  • Patch Flash: Yes
    
  • Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    
  • Imei Repair Command: No Need
    
  • Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & Update Firmware to which has in modem.

• Here is Successfully Repair phones by our Belong Users....

• World's 1st Vivo 1610(Y55s)|MSM8917|Read Firmware Done By Inferno Unitool
• world's first Starnaute 4 frp done
• Oppo A71 MT6755/50 supported with Great Volcano Inferno tool
• Nokia 3 TA 1032 FRP Successefull Done Inferno Tool Clear FRP 2
• Intex clouds x2 pattern lock done by valcano
• Lenovo vibe c a2020a40 qualcomm msm8909 write flash done with Inferno UNI Tool.
• Q mobile m90 mt6582 format done with inferno mtk
• HUAWEI LUA-L01 factorty file write done
• Worlds first Lava A3 backup factory file done with Inferno Tool
• World Ist Q Mobile 3G2 Mtk6276 Nand Full Supported With Volcano,Inferno Key
• OPPO A71 Demo Remove Successfully Done With Inferno Tool
• Starnaute 4 frp done
• Huawei LUA-U22 FRP Remove done by Interno MTK
• Huawei LUA-U22 FRP Remove done
• Motorola e2 reset frp done with inferno Unitoola
• Oppo A71 format done by unitool inferno
• OPPO F3 CPH1609 MT6755/50 PATTERN & FRP REMOVE Done
• Lava Iris 810 Read & Write Flash Done With Different HW & SW Version By Inferno
• Real World 1st ☆☆ Qmobile 3G5 Mt6276 Full Support Added by InfernoTool
• World Ist Q Mobile 3g5 MTK 6276 NAND Fully Supported Only On With Volcano Inferno Key
• AGAIN REAL WORLD FIRST AND WORLD'S BEST SUPPORT MOBIWIRE APPONI MT6276 FULLY SUPPORTED BY INFERNO TOOL
• Real World 1st Jazz x cite mt6276 128 mb read and write don with great inferno
• World's First Gionee X1 Full support with Inferno MTK Module
• World first Letv Le1PRO X800+ flash read-write done with Inferno UNI
• Vivo y53 100% work password remove done with great volcano unitool
• World's First New Nokia 3 MTK 67xx Initial Tests With Inferno MTK-Beta...
• Huawei tag l21 frp done by geat volcano mtk tool
• Huawei tag l21 frp done by geat volcano mtk tool
• QMOBILE A20 CLEAR VIRUSES DONE WITH GREAT INFERNO TOOL
• HUAWEI Y520-U22 MT6572 4GB EMMC,Hang On logo Solved With Great Inferno tool
• Qmobile s1 read pattern lock & reset pattern lock done with great inferno tool
• Tablet g100 read pattern lock done with great inferno tool
• QMOBILE X6I 3G SPD 7715 HANG ON LOGO DONE WITH GREAT INFERNO TOOL
• MOBIWIRE HALONA MT6572 WIPE DATA|CACHE AND FRP REMOVE DONE BY INFERNO TOOL
• QMOBILE M95 SPD7731 Read Write Flash File Successfull Done With Inferno Tool
• HISENSE HS-U961 MT6572 DEAD DEVICE REVIVED BACK BY WRITE FACTORY FILE WITH INFERO TOOL
• WORLD FIRST SPD 7731C V6.0 MOBICEL TRENDY FRP REMOVED BY INFERNO SPD AMAZING TOOL
• MOBICEL GEM MT6572 FACTORY FILE BACKUP DONE BY INFERNO MTK MODULE
• world 2nd trendy 6.0 sod 7731c frp done
• AG GLOW MT6572 FRP LOCK REMOVE DONE BY INFERNO MTK MODULE
• VODAFONE VF685 MT6572 STUCK AT SOLVED BY JUST ONE CLICK OR WIPE DATA|CACHE FUNCTION OF INFERNO MTK MODULE
• HISENSE HS-U601 SPD 7731G PASSWORD LOCK REMOBE IN ONE CLICK BY INFERNO SPD MODULE
• Micromax Q370 SPD7731 Hang Logo Solved With Format By Volcano Inferno
• Gfive President A97 Write Flash By Volcano Inferno
• Symphony E78 Hang Logo Solved With Different Version File By Volcano Inferno
• Qmobile linq x70 hang on logo done with great inferno tool
• Oppo A33F Neo 7 MSM8916 read info and read flash done with Inferno Uni tool
• symphony p8 pro frp done in a second
• feature phone Q mobile N275 mt6260 write flash done with inferno mtk
• Volcono inferno successful reports by prabha
• LAVA Z1 HANG ON LOGO DONE
• INFOCUS M370I FRP DONE
• LENOVO A6020a46 FRP DONE
• SAMSUNGS B310E PHONE LOCK READ DONE
• tecno i5pro frp remove sucsses via great Inferno unitool
• Qmobile x32 clear frp lock done with Inferno tool
• Qmobile x700 pro clear frp lock done with inferno tool
• Qmobile x90 hang on logo done with inferno tool
• Lenovo tab 10 (TB-X103F) read firmware done
• Kimfly M4 6.0 SC7731C FRP Unlocked By Inferno
• Micromax Q465 Spreadtrum SC9832 Frp Remove Done
• Xiaomi Redmi 4A read file formate done
• Karbonn Titanium Machfive|MT6582|Reset theft Lock Done by Inferno MTK
• World's First Vivo Latest Secure MTK6750 will be added in Inferno soon
• A37f Clear Screen Lock without data lose with Volcano Inferno Uni-tool
• Micromax Q326 Pattern And Firmware Read Done With Inferno
• Oppo F3 CPH1609 pattren Lock & FRP Removed sucsessfully By Inferno
• World 1st Etel T119 Format Done 100%
• Qmobile X33 spd 7731 Format & Clear FRP remove successfully done with Inferno SPD
• World First Vivo V7 Plus FRP Remove Done
• VIVO 1714 Y69 MT6755 Android 7.0 Demo Fixed With Inferno UNI Tool
• VIVO 1714 Y69 MT6755 Android 7.0 Demo Fixed With Inferno UNI Tool Full Working
• VIVO Y69 READ INFO AND DEMO FIX DONE WITH SINGLE CLICK OF INFERNO
• VIVO 1714 y69 demo fix done by inferno
• vIVO 1714 Y69 MT6755 Android 7.0 Demo done
• VIVO 1714 Y69 MT6755 Android 7.0 Demo Fixed With Inferno
• World 1st hisense u601s frp done
• Moto xt1254 6.0 frp done with unitool
• Q mobile x30 MT6572 hang on logo done with inferno mtk
• Cherry Mobile Omega Lite 2 Stuck On Logo Format By InfernoTool SPD
• Tecno I3 Android 7.0 Frp Remove Done In Expert Mode With Inferno
• Clone Samsung sm-G6000 MT6572 Read backup file done with Inferno tool
• Vivo Y69 (1714) readed factory firmware successfully
• Lenovo Vibe B A2016a40 Remove Frp Lock With Inferno In Expert Mode
• Samsung j106f frp remove by volcano unitool
• Lenovo Tab A3300GV Successfully Flashed with Inferno Key
• Oppo A71 Read information/Backup factory File/Format/FRP All Done With Inferno Tool
  
• Unbrick h900 att detect 9008 done with unitool.
• world first HUAWEI LUA-U22_ backup factory firmware done by great volcano
• mi redmi note 3 mi account remove done by InfernoTool_UniTool_EXT_Volcano
• Cherry Mobile Flare J1s B 6.0 Google Account Format Done by Volcano InfernoTool SPD
• HTC Desire 620G dual sim MT6592 Backup Successfully done by inferno Tool
• world first sucure boot Huawei CUN-U29 backup factory firmware done by volcano
• VIVO V5s Demo Set successfully unlocked by Inferno Unitool
• Q mobile a300 corupted imei write/update with orignal imei done with inferno mtk..
• Oppo F3 (cph1609) Dead after Format INFERNO TOOL
• Huawei CUN-U29 backup factory firmware done

Buy Now: GPGIndustries
VolcanoBox Inferno Trusted Resellers: http://forum.gsmhosting.com/vbb/f723...-list-2242750/
Support Area to Download VolcanoBox Inferno: Index of ./VolcanoBox/Volcano_Inferno_Updates/Inferno_UniTool_Module_Updates/