| REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.
Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on the phone in download mode (turn off phone, hold vol.down + Camera + Power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button.
Operation: Repair
Selected model: SM-G920T
Software version: 29.5
If you are looking for 'Repair Network' function then you should use 'Patch Certificate'
Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-G920T
Android version: 6.0.1
Product code: SM2G920TZWATMB
Phone version: G920TUVU4EPF1
PDA version: G920TUVU4EPF1
CSC version: G920TTMB4EPF1
CSC country code: USA
CSC sales code: TMB
HW version: REV1.0
Phone SN: R58G519S27N
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2016-06-01
RF cal date: 20150518
IMEI: 3XXXXXXXXXXXXXX
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Initialization zTool... OK
Running zTool, please wait... OK
HWID: 88 51 A8 AC 8E 06 00 00 00 00 00 00 00 00 00 00
Calculating... OK
Repairing... OK
Writing NV data... OK
Rebooting phone... OK
Repair done
Done with Samsung Tool PRO v.29.5 |