[blang]

Originally Posted by gsmjiya

eMMC_tool Suite ver. 1.4.8.0
Microsoft Windows 7 (32 bit) build 7601 (6.1.7601.18015)

Looking for EasyJTAG box...
EasyJTAG API ver. 2008
Setting IO Levels to 2.8V
Setting frequence to 14 Mhz
HiPower mode is OFF
EasyJTAG Box Serial = 030*********
Card Serial = AAF2-8719
EasyJTAG Box Firmware = 01.60

Changelog:

08.08.2017 (ver 1.4.8.0)
Fix: Bugs that have been found through your crash report
Fix: Saving VCF for contacts
Add: Multiple file selection for Samsung firmware
Add: Write full Extcsd or write only the boot configuration ("Repair Extcsd" button)
Add: Intel vendor (for easy read/write ROM2/ROM3/GP1)
Add: "Pinouts" tab (taken from the catalog of classic software)
Add: Checker for Sony TrimArea
Add: Speed graph for "Random verify emmc"
Add: Fat16/Fat32/exFat support (Explorer)

HiPower mode is OFF
Frequence: 14 Mhz
CMD Pullup Level: 2640 mV
CMD Active Level: 2722 mV
Can't init device. Reason: CMD Timeout Error

Error: First select the Pit-file

Error: First select the Pit-file

Error: First select the Pit-file


without work just salect file show error

are you sure emmc good?
all wires connected?