View Single Post
Old 11-09-2017, 21:00   #1 (permalink)
Pijush Das
Product Supporter
 
Pijush Das's Avatar
 
Join Date: Mar 2013
Location: JTAG/eMMC/UFS
Posts: 892
Member: 1902789
Status: Offline
Thanks Meter: 1,100
eMMC Dump Read Done From Samsung SM-G360H...

HiPower mode is OFF
Frequence: 21 Mhz
CMD Pullup Level: 1753 mV
CMD Active Level: 1773 mV
EMMC Device Information :
EMMC CID: 150100514E5730304D000C7CC81332B6
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacture Name: SAMSUNG
EMMC Manufacture ID: 0x15 , OEM ID: 0100
EMMC Manufacture Date: 3/2015 , Rev: 00
EMMC NAME: QNW00M , S/N: 0C7CC813 , rev. 00
EMMC NAME (HEX): 514E5730304D
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 KB (000000080000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: QNW00M_0C7CC813_20171110_011502.extcsd
EMMC Init completed.



HiPower mode is OFF
Frequence: 21 Mhz
CMD Pullup Level: 1753 mV
CMD Active Level: 1784 mV
EMMC Device Information :
EMMC CID: 150100514E5730304D000C7CC81332B6
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacture Name: SAMSUNG
EMMC Manufacture ID: 0x15 , OEM ID: 0100
EMMC Manufacture Date: 3/2015 , Rev: 00
EMMC NAME: QNW00M , S/N: 0C7CC813 , rev. 00
EMMC NAME (HEX): 514E5730304D
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 KB (000000080000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: QNW00M_0C7CC813_20171110_010739.extcsd
EMMC Init completed.

Reading from: ROM1 , start: 0x000000000000 , size: 0x000020000000
Output file: C:\Users\BOSS\Desktop\New folder (8)\EMMC_QNW00M_ROM1_000000000000_000020000000.bin
eMMC switching to ROM1
Reading partition...
Done reading partition. Read speed: 1269.87 Kb/s

Reading from: ROM2 , start: 0x000000000000 , size: 0x000000400000
Output file: C:\Users\BOSS\Desktop\New folder (8)\EMMC_QNW00M_ROM2_000000000000_000000400000.bin
eMMC switching to ROM2
Reading partition...
Done reading partition. Read speed: 1406.78 Kb/s

Reading from: ROM3 , start: 0x000000000000 , size: 0x000000400000
Output file: C:\Users\BOSS\Desktop\New folder (8)\EMMC_QNW00M_ROM3_000000000000_000000400000.bin
eMMC switching to ROM3
Reading partition...
Done reading partition. Read speed: 1405.00 Kb/s

  Reply With Quote
The Following 3 Users Say Thank You to Pijush Das For This Useful Post:
Show/Hide list of the thanked
 
Page generated in 0.08481 seconds with 7 queries