View Single Post
Old 11-10-2017, 06:01   #9 (permalink)
snot522
Crazy Poster
 
Join Date: Feb 2007
Location: Micronesia
Posts: 57
Member: 454067
Status: Offline
Thanks Meter: 50
Thumbs up 🐙 Moto XT1625 FRP successfully removed

Welcome to Octoplus FRP Tool v.1.0.1
Platform: MOTOROLA
Selected model: XT1625
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model:
Firmware released date:
Firmware released time:
Firmware compiled date:
Firmware compiled time:
SW version: MPSS.TA.2.1.c3-00025-8976_GEN_PACK-1.99393.1.101883.1
Enabling "USB Debugging" mode...
Searching for a phone. Please wait...
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: motorola Moto G (4)
Detected phone model: XT1625
SW version: NPJ25.93-14.5
Date: Thu Jul 20 03:28:39 CDT 2017
Android version: 7.0
Baseband M8952_70030.25.03.64R ATHENE_RETUSA_CUST
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.0.1 Software version.

Last edited by Octopus box; 11-10-2017 at 06:49.
  Reply With Quote
The Following 11 Users Say Thank You to snot522 For This Useful Post:
Show/Hide list of the thanked
 
Page generated in 0.06626 seconds with 7 queries