xiaomi mi 6 mi account remove done by infinity
Code:
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 835 [MSM8998]
ID_BLOCK_S : CB9E1523
ID_BLOCK_I : 0005E0E1
ID_BLOCK_L : CBC9D14934C5F9B673B39B6B28DC0026
ID_BLOCK_L : 6AF7BCCFCAAEF1B3D03E1D3BA5001C9B
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00001000
UFS Device : TOSHIBA THGAF4T0N8LBAIRB0100
UFS SectSize : 0x1000
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x198
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x801f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!
MIAccount reset passed!
Complete reset :
> If device lock after WiFi - use RESET MI APP
> PowerOn device, NOT power WiFi, SIM and etc. Make device setup
> Reset MI APP. Device will not have MIServices anymore
Done!
Elapsed: 00:00:27
remove mi app after setup wizard completed
Code:
Reconnect Power/Cable!
Operation : Reset Settings [ v1.15 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 835 [MSM8998]
ID_BLOCK_S : CB9E1523
ID_BLOCK_I : 0005E0E1
ID_BLOCK_L : CBC9D14934C5F9B673B39B6B28DC0026
ID_BLOCK_L : 6AF7BCCFCAAEF1B3D03E1D3BA5001C9B
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00001000
UFS Device : TOSHIBA THGAF4T0N8LBAIRB0100
UFS SectSize : 0x1000
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x198
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x801f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!
Remove Ok! If device stuck, not boot or etc. - then reflash required!
Mi Service NOT fuction anymore! Device reset to factory can make problems!
Done!
Elapsed: 00:00:35
Reconnect Power/Cable!