Performed by 2.7.8 Software version.
To perform Reset FRP operation do the next:
1. Attach testpoint as shown on Figure in manual, and connect phone with Micro USB cable.
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008".
3. Release testpoint.
Found port COM7
Connecting...OK
Sending loader...OK
Reconnecting phone...OK
Checking request...OK
Reading partitions...OK
Searching signatures...
Resetting FRP Lock...
Rebooting phone...
Performed by 2.7.8 Software version. |