 I-BALL BRAVO PLUS 1.8E READ USER CODE Done
SUCCESSFULLY READ USER CODE(I-BALL BRAVO PLUS 1.8E)USB
SPRD mode : SC6531 : REV : 0000 : NOR
Operation : Identify [ v1.02 ]
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531 Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]
IMEI[1] : XXXXXXXXXXXXX
IMEI[2] : XXXXXXXXXXXXX
Done!
Elapsed: 00:00:22
================================================== ================================================== ================
Operation : Read UserCode [ v1.02 ]
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531 Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]
STATE : NOT ACTIVE : CODE : 42255
Done!
Elapsed: 00:00:15
THANKS INFINITY-BOX TEAM |