| Compression is ON
Z3X EasyJtag Software ver. 2.6.0.1
Loading eMMC GEN1 Firmware... IO: 2800 mV
Box S/N: 0500D01E3BC5A469, ,FW Ver.: 01.62
CMD Pullup Level:2072 mV
CMD Active Level:2433 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 45010053454D3034472808888BCA90A4
EMMC CSD : D00F00320F5903FFFFFFFDFF8A4040A6
EMMC Manufacturer ID: 0045 , OEM ID: 0100
EMMC Date: 09/2013 Rev.0x28
EMMC NAME: SEM04G , S/N: 143166410
EMMC NAME (HEX): 53454D30344700
EMMC ROM1 (Main User Data) Capacity: 3776 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 2048 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x01
Device support partitioning feature
Device cannot have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: SEM04G_ 143166410_20180112_2222.extcsd
Done. |