I'm stuck (I've about 1 hour with same message) at:
Status for device COM2:
-----------------------
Baud: 115200
Parity: None
Data Bits: 8
Stop Bits: 1
Timeout: ON
XON/XOFF: OFF
CTS handshaking: OFF
DSR handshaking: OFF
DSR sensitivity: OFF
DTR circuit: OFF
RTS circuit: OFF
Status for device CON:
----------------------
Lines: 40
Columns: 110
Keyboard rate: 31
Keyboard delay: 1
Code page: 437
íδíδíδíδíδíδíδíδíδíδíδíδíδíδíδíδíδíδíδ
Input Port Number[1~300,x:Exit]:2
2
Start Recovery.
emmcdl.exe -p COM2 -f prog_ufs_firehose_8996_ddr.elf -MemoryName ufs -SetActivePartition 1 -x rawprogram0.xml -x rawprogram1.xml -x rawprogram2.xml -x rawprogram3.xml
Version 2.10 |