GSM-Forum - View Single Post

belal1987 · 02-26-2018, 15:31

After Write Done But Not power on

eMMC_tool Suite ver. 1.4.9.0 (release date: 12.12.2017)
Microsoft Windows 7 (32 bit) build 7600 (6.1.7600.16385)

Looking for EasyJTAG box...
EasyJTAG API ver. 2022
EasyJTAG Box Serial = 0100E01C0451F95B
Card Serial = AA2E-6087
EasyJTAG Box Firmware = 1.62

Changelog:

12.12.2017 (ver 1.4.9.0)
Fix: Bugs that have been found through your crash report
Fix: RandomVerify function
Fix: Creation of GPT for Samsung (write by vendor)
Fix: Failed to mount large Fat partitions (explorer)
Fix: Extraction from contact2.db (explorer)
Fix: Error in the "build.prop" parser
Fix: CID Parser
Add: Support for EasyJtag Plus Box
Add: Path for TempDir and InitialDir (option in settings)
Add: Unpack Lenovo QSB (utilities)
Add: Selecting a PIT file from CSC (write by vendor Samsung)
Add: Detect for encrypted dumps from GPG Box
Add: Detect for FullDiskEncryption Partition (explorer)
Add: LinearVerify of the Partition (read by vendor)
Add: Information base about emmc compatibility (thanks to phonemicrodb)
Add: Resizing the window (for small screen resolutions)
Add: Converting large partitions in SparseImage when reading by vendor (option in settings)
Add: Mounting SparseImage (explorer)
Add: Automatic backup of the EFS partition for Samsung (read by vendor)
Add: Formatting of EFS partition for Samsung on request (write by vendor)

Setting frequence to 21 Mhz
CMD Pullup Level: 0 mV
CMD Active Level: 2010 mV
Can't init device. Reason: CMD Timeout Error

Setting frequence to 21 Mhz
CMD Pullup Level: 1732 mV
CMD Active Level: 2320 mV
EMMC Device Information :
EMMC CID: 90014A484247346505076FB6CC12226C
EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D2
EMMC Manufacture Name: SKHYNIX , EMMC NAME: HBG4e , EMMC NAME (HEX): 484247346500 , S/N: 6FB6CC12 , rev. 0x07
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 2/2015
EMMC ROM 1 (Main User Data) Capacity: 29824 MB (000748000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: HBG4e_6FB6CC12_20180226_193544.extcsd
EMMC Init completed.

Warning: Health report is very BAD

Device Life Time Estimation (MLC) [269]: 0x0B Exceeded its maximum estimated device life time
Device Life Time Estimation (SLC) [268]: 0x01 0% - 10% device life time used
Pre EOL information [267]: 0x03 Urgent

Scanning soft partitions
Partition table not found

Setting frequence to 21 Mhz
CMD Pullup Level: 1722 mV
CMD Active Level: 2330 mV
EMMC Device Information :
EMMC CID: 90014A484247346505076FB6CC12226C
EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D2
EMMC Manufacture Name: SKHYNIX , EMMC NAME: HBG4e , EMMC NAME (HEX): 484247346500 , S/N: 6FB6CC12 , rev. 0x07
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 2/2015
EMMC ROM 1 (Main User Data) Capacity: 29824 MB (000748000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: HBG4e_6FB6CC12_20180226_193613.extcsd
EMMC Init completed.

Warning: Health report is very BAD

Device Life Time Estimation (MLC) [269]: 0x0B Exceeded its maximum estimated device life time
Device Life Time Estimation (SLC) [268]: 0x01 0% - 10% device life time used
Pre EOL information [267]: 0x03 Urgent

Operation: Write Dump

Writing to: ROM1 , start: 0x000000000000 , size: 0x00004D800000
Input file: C:\Users\Software Point\Downloads\Compressed\HTC_M9_BGND3R_ROM1_OK\H TC_M9_BGND3R_ROM1_OK.bin
eMMC switching to ROM1
Writing partition...
Error writing at address: 000000000000 , error: 512, 512 Unknown error ... Retry #1
Error writing at address: 000000000000 , error: 512, 512 Unknown error ... Retry #2
Error writing at address: 000000000000 , error: 512, 512 Unknown error ... Retry #3
Done writing partition. Write speed: 511.75 KB/s

All done time: [00:41:21:645]

02-26-2018, 15:31	#5 (permalink)
belal1987 Freak Poster Join Date: Apr 2012 Location: Rangpur Posts: 111 Member: 1747434 Status: Offline Sonork: 5400 Thanks Meter: 13	After Write Done But Not power on eMMC_tool Suite ver. 1.4.9.0 (release date: 12.12.2017) Microsoft Windows 7 (32 bit) build 7600 (6.1.7600.16385) Looking for EasyJTAG box... EasyJTAG API ver. 2022 EasyJTAG Box Serial = 0100E01C0451F95B Card Serial = AA2E-6087 EasyJTAG Box Firmware = 1.62 Changelog: 12.12.2017 (ver 1.4.9.0) Fix: Bugs that have been found through your crash report Fix: RandomVerify function Fix: Creation of GPT for Samsung (write by vendor) Fix: Failed to mount large Fat partitions (explorer) Fix: Extraction from contact2.db (explorer) Fix: Error in the "build.prop" parser Fix: CID Parser Add: Support for EasyJtag Plus Box Add: Path for TempDir and InitialDir (option in settings) Add: Unpack Lenovo QSB (utilities) Add: Selecting a PIT file from CSC (write by vendor Samsung) Add: Detect for encrypted dumps from GPG Box Add: Detect for FullDiskEncryption Partition (explorer) Add: LinearVerify of the Partition (read by vendor) Add: Information base about emmc compatibility (thanks to phonemicrodb) Add: Resizing the window (for small screen resolutions) Add: Converting large partitions in SparseImage when reading by vendor (option in settings) Add: Mounting SparseImage (explorer) Add: Automatic backup of the EFS partition for Samsung (read by vendor) Add: Formatting of EFS partition for Samsung on request (write by vendor) Setting frequence to 21 Mhz CMD Pullup Level: 0 mV CMD Active Level: 2010 mV Can't init device. Reason: CMD Timeout Error Setting frequence to 21 Mhz CMD Pullup Level: 1732 mV CMD Active Level: 2320 mV EMMC Device Information : EMMC CID: 90014A484247346505076FB6CC12226C EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D2 EMMC Manufacture Name: SKHYNIX , EMMC NAME: HBG4e , EMMC NAME (HEX): 484247346500 , S/N: 6FB6CC12 , rev. 0x07 EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 2/2015 EMMC ROM 1 (Main User Data) Capacity: 29824 MB (000748000000) EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000) EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No Extended CSD Information : Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot Boot Bus Config: 0x00 , width 1bit H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled Supported partition features [PARTITIONING_SUPPORT]: 0x07 Device supports partitioning features Device can have enhanced technological features in partitions and user data area Device can have extended partitions attribute Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00 Backup saved: HBG4e_6FB6CC12_20180226_193544.extcsd EMMC Init completed. Warning: Health report is very BAD Device Life Time Estimation (MLC) [269]: 0x0B Exceeded its maximum estimated device life time Device Life Time Estimation (SLC) [268]: 0x01 0% - 10% device life time used Pre EOL information [267]: 0x03 Urgent Scanning soft partitions Partition table not found Setting frequence to 21 Mhz CMD Pullup Level: 1722 mV CMD Active Level: 2330 mV EMMC Device Information : EMMC CID: 90014A484247346505076FB6CC12226C EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D2 EMMC Manufacture Name: SKHYNIX , EMMC NAME: HBG4e , EMMC NAME (HEX): 484247346500 , S/N: 6FB6CC12 , rev. 0x07 EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 2/2015 EMMC ROM 1 (Main User Data) Capacity: 29824 MB (000748000000) EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000) EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No Extended CSD Information : Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot Boot Bus Config: 0x00 , width 1bit H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled Supported partition features [PARTITIONING_SUPPORT]: 0x07 Device supports partitioning features Device can have enhanced technological features in partitions and user data area Device can have extended partitions attribute Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00 Backup saved: HBG4e_6FB6CC12_20180226_193613.extcsd EMMC Init completed. Warning: Health report is very BAD Device Life Time Estimation (MLC) [269]: 0x0B Exceeded its maximum estimated device life time Device Life Time Estimation (SLC) [268]: 0x01 0% - 10% device life time used Pre EOL information [267]: 0x03 Urgent Operation: Write Dump Writing to: ROM1 , start: 0x000000000000 , size: 0x00004D800000 Input file: C:\Users\Software Point\Downloads\Compressed\HTC_M9_BGND3R_ROM1_OK\H TC_M9_BGND3R_ROM1_OK.bin eMMC switching to ROM1 Writing partition... Error writing at address: 000000000000 , error: 512, 512 Unknown error ... Retry #1 Error writing at address: 000000000000 , error: 512, 512 Unknown error ... Retry #2 Error writing at address: 000000000000 , error: 512, 512 Unknown error ... Retry #3 Done writing partition. Write speed: 511.75 KB/s All done time: [00:41:21:645]