Prestigio PSP3510 DUO Firmware & NVRAM
Code:
==== [27.02.2018 12:11:40] ====
Operation: Upload
File: C:\InfinityBox\CM2SPD\phdata\backup\NV_SC7731_Prestigio_PSP3510_DUO_CM2.7z
Authentication...
Initialization...
27.02.2018: 12:12:03: Upload...
27.02.2018: 12:12:04: Uploading 20,980 bytes...
27.02.2018: 12:12:04: Finished
Operation: Upload
File: C:\InfinityBox\CM2SPD\phdata\backup\SC7731C_DTE50B8L_6.0_PSP3510DUO.20170920.1.0.05_PSP3510DUO\SC7731C_DTE50B8L_6.0_PSP3510DUO.20170920.1.0.05_PSP3510DUO.7z
Authentication...
Initialization...
27.02.2018: 12:12:09: Upload...
27.02.2018: 12:12:10: Uploading 1,094,479,664 bytes...
27.02.2018: 12:13:54: Finished
Log operation: Code:
Operation : Read FullFlash [ v1.27 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
- > Wait phone connected ...
Phone found! [ 72 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name : PSP3510DUO
Model Brand : Prestigio
Model Device: DTE50B8L
AndrVersion : 6.0
BaseBand CPU: SC7731C
Project Ver : PSP3510DUO.20170920.1.0.05
Model Ext : PSP3510DUO
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.32.2_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 2919 MiB
Saved to : C:\InfinityBox\CM2SPD\phdata\backup\SC7731C_DTE50B8L_6.0_PSP3510DUO.20170920.1.0.05_PSP3510DUO\
Done!
Code:
Operation : Read NV [ v1.27 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 72 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Detected eMMC Flash , Structure detect Ok!
Read GSM NV
Read WCN NV
Read Ok , 0xCA53
Saved to : C:\InfinityBox\CM2SPD\phdata\backup\NV_SC7731_Prestigio_PSP3510_DUO_CM2.spdnv