[black-micron]

Originally Posted by pimpak

I need to collect data from SM-G318H. It’s quite dead so I’m trying ISP.
I have RIFF v1 and an adapter (like this https://multi-com.eu/,details,id_pr,...ox-rc1000.html)
First connection and I get this:

[2018-03-29 11:51:30] [START OPERATION_ID = 26]
[2018-03-29 11:51:30] Open serial port...OK
[2018-03-29 11:51:30] Connecting to the RIFF Box...OK
[2018-03-29 11:51:30] Firmware Version: 1.49 (RIFFBOX1), JTAG Manager Version: 1.76
[2018-03-29 11:51:30]
[2018-03-29 11:51:30] Connecting to the SD/eMMC Card...OK
[2018-03-29 11:51:30] Set I/O Voltage reads as 2.70V, SD_CLK Frequency is 2.50 MHz
[2018-03-29 11:51:30]
[2018-03-29 11:51:30] Memory Type .......................... eMMC
[2018-03-29 11:51:30] Manufacturer ID ...................... 0x90
[2018-03-29 11:51:30] OEM/Application ID ................... 0x4A
[2018-03-29 11:51:30] Product Name ......................... "H4G2b "
[2018-03-29 11:51:30] Package .............................. BGA
[2018-03-29 11:51:30] User Area Partition Size ............. 0x0000E9000000 Bytes (3.64 GB)
[2018-03-29 11:51:30] Boot Partition Size .................. 0x000000400000 Bytes (4.00 MB)
[2018-03-29 11:51:30] RPMB Partition Size .................. 0x000000400000 Bytes (4.00 MB)
[2018-03-29 11:51:30] OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
[2018-03-29 11:51:30] Write Protection Bits ................ NONE
[2018-03-29 11:51:30] ExtCSD Register Fields ............... [177] = 0x00, [179] = 0x08, [162] = 0x00
[2018-03-29 11:51:30] Boot Configuration ................... Boot from Boot Partition 1 (Bus Width = 1Bit)
[2018-03-29 11:51:30] Chip Revision ........................ 0.1
[2018-03-29 11:51:30] Multimedia Card Revision ............. 1.6 (eMMC v4.5, v4.51)
[2018-03-29 11:51:30] Serial Number ........................ 0x26CA984D
[2018-03-29 11:51:30] Memory Manufacturing Date ............ October, 2015
[2018-03-29 11:51:30] [FINISH OPERATION_ID = 26]

I started to read but it hung after few minutes and after restart I get this:

[2018-03-29 12:22:02] [START OPERATION_ID = 26]
[2018-03-29 12:22:02] Open serial port...OK
[2018-03-29 12:22:02] Connecting to the RIFF Box...OK
[2018-03-29 12:22:02] Firmware Version: 1.49 (RIFFBOX1), JTAG Manager Version: 1.76
[2018-03-29 12:22:02]
[2018-03-29 12:22:02] Connecting to the SD/eMMC Card...OK
[2018-03-29 12:22:02] Set I/O Voltage reads as 2.79V, SD_CLK Frequency is 2.50 MHz
[2018-03-29 12:22:02]
[2018-03-29 12:22:02] Memory Type .......................... eMMC
[2018-03-29 12:22:02] Manufacturer ID ...................... 0x65
[2018-03-29 12:22:02] OEM/Application ID ................... 0x6F
[2018-03-29 12:22:02] Product Name ......................... "M MOR "
[2018-03-29 12:22:02] Package .............................. Removable
[2018-03-29 12:22:02] User Area Partition Size ............. 0x000075700000 Bytes (1.83 GB)
[2018-03-29 12:22:02] Boot Partition Size .................. 0x000000200000 Bytes (2.00 MB)
[2018-03-29 12:22:02] RPMB Partition Size .................. 0x000000020000 Bytes (128.00 KB)
[2018-03-29 12:22:02] OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
[2018-03-29 12:22:02] Write Protection Bits ................ NONE
[2018-03-29 12:22:02] ExtCSD Register Fields ............... [177] = 0x00, [179] = 0x78, [162] = 0x00
[2018-03-29 12:22:02] Boot Configuration ................... Boot from User Area (Bus Width = 1Bit)
[2018-03-29 12:22:02] Chip Revision ........................ 8.1
[2018-03-29 12:22:02] Multimedia Card Revision ............. 1.5 (eMMC v4.41)
[2018-03-29 12:22:02] Serial Number ........................ 0x00000615
[2018-03-29 12:22:02] Memory Manufacturing Date ............ May, 2017
[2018-03-29 12:22:02] [FINISH OPERATION_ID = 26]

This one I can not read at all.

[2018-03-29 12:25:06] [START OPERATION_ID = 27]
[2018-03-29 12:25:09] Open serial port...OK
[2018-03-29 12:25:09] Connecting to the RIFF Box...OK
[2018-03-29 12:25:09] Firmware Version: 1.49 (RIFFBOX1), JTAG Manager Version: 1.76
[2018-03-29 12:25:09]
[2018-03-29 12:25:09] Connecting to the SD/eMMC Card...OK
[2018-03-29 12:25:09] Set I/O Voltage reads as 2.79V, SD_CLK Frequency is 2.50 MHz
[2018-03-29 12:25:09]
[2018-03-29 12:25:09] Detected eMMC Chip, ID: 0x65/0x6F (M MOR ), User Area Partition = 0x000075700000 Bytes (1.83 GB)
[2018-03-29 12:25:09]
[2018-03-29 12:25:09] Reading "User Area Partition" address space from 0x000000000000 to 0x0000756FFFFF
[2018-03-29 12:25:09] ERROR: Read Failed with Error Code: (17:62). Terminating at 0x000000000000
[2018-03-29 12:25:09] [FINISH OPERATION_ID = 27]

Can some explain me what is wrong?

your eMMC dead. replace eMMC and repair Boot.