GSM-Forum - View Single Post - Meizu U10 Format FS/Read/Write Flash/MemoryTool with MTK 2.0

localizator · 04-27-2018, 22:35

Meizu U10 Format FS/Read/Write Flash/MemoryTool with MTK 2.0

Identify

Identify - [Click to open]

Reset Settings / Format FS

FULL FACTORY (FORCED + FRP) - [Click to open]

Read FW

Read Firmware - [Click to open]

Code:

Operation : Read Firmware [ v2.00 r2 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM126)
MODE : PRELOADER PORT
PORT : 126
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000007
BROM : SecMode  : SBC+SLA+SDA
BROM : PRELOADER PORT
AGENT : Look for suitable BootChain in DA ... 
AGENT : DA_PL.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0x80000000 [ 2,00 GB ]

        EMMC: 150100525831424D4207714AAADFA39B
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX1BMB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0x747C00000 [ 29,12 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000

        RNID : BDD91DE9C55CB2502A91D9B0ED9FD230

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : MRA58K
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2016-08-05
Build Time     : 1474911457
Board Platform : mt6750
Product Brand  : Meizu
Product Manfct : Meizu
Display ID     : Flyme 5.2.3.0G
Product Model  : U10
Product Name   : meizu_U10
Product Device : U10
Product Board  : U10
Product Info   : U10

MT6750__Meizu__U10__6.0__Flyme_5.2.3.0G__MRA58K__U10

Read : preloader.bin
Read : recovery.img
Read : custom.img
ExtSparse : Compression ratio : 96%
Read : proinfo.img
Read : devinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : md1arm7.img
Read : md3rom.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : tz.img
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 36%
Read : cache.img
Read : userdata.img

FW Size  : 1,82 GB
Android Info saved : _Android_info.txt
Scatter  : MT6750_Android_scatter.txt
Saved to : D:\dump\MT6750__Meizu__U10__6.0__Flyme_5.2.3.0G__MRA58K__U10\

Done!
Elapsed: 00:03:46

Flash

Flash Firmware - [Click to open]

Code:

Created by Infinity-Box (c) 2018
Chinese Miracle II : MediaTek Service Module
Device Info file   : _Android_info.txt

Patch Level    : MRA58K
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2016-08-05
Build Time     : 1474911457
Board Platform : mt6750
Product Brand  : Meizu
Product Manfct : Meizu
Display ID     : Flyme 5.2.3.0G
Product Model  : U10
Product Name   : meizu_U10
Product Device : U10
Product Board  : U10
Product Info   : U10

Operation : Write Flash [ v2.00 r2 ]

Repartition  : Disabled
Flash Verify : Disabled
Pre-Erase    : Enabled
Verify HW/SW : Enabled
XData Backup : Disabled

Files :16
[FL] : Set : recovery.img
[FL] : Set : custom.img
[FL] : Set : md1rom.img
[FL] : Set : md1dsp.img
[FL] : Set : md1arm7.img
[FL] : Set : md3rom.img
[FL] : Set : lk.bin
[FL] : Set : lk.bin
[FL] : Set : boot.img
[FL] : Set : logo.bin
[FL] : Set : tz.img
[FL] : Set : tz.img
[FL] : Set : secro.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0x74594E4C [ 1,82 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM126)
MODE : PRELOADER PORT
PORT : 126
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000007
BROM : SecMode  : SBC+SLA+SDA
BROM : PRELOADER PORT
AGENT : Look for suitable BootChain in DA ... 
AGENT : DA_PL.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0x80000000 [ 2,00 GB ]

        EMMC: 150100525831424D4207714AAADFA39B
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX1BMB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0x747C00000 [ 29,12 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000

        RNID : BDD91DE9C55CB2502A91D9B0ED9FD230

DA : USB : HIGH-SPEED

Boot done!


[FL] : HW verification passed!

[FL] : Flashing now ... 

Write : RECOVERY
Write : CUSTOM
Write : MD1IMG
Write : MD1DSP
Write : MD1ARM7
Write : MD3IMG
Write : LK
Write : LK2
Write : BOOT
Write : LOGO
Write : TEE1
Write : TEE2
Write : SECRO
Write : SYSTEM
Write : CACHE
Write : USERDATA

[FL] : Flashing finished!


Done!
Elapsed: 00:01:24

MemoryTool

Init

Init MemoryTool - [Click to open]

Read USERDATA

Read USERDATA with MemoryTool [25,43Gb] - [Click to open]

Write USERDATA

Write USERDATA with MemoryTool [25,43Gb] - [Click to open]

Download Firmware [Readed with CM2 MTK2.0] [Tested]
MT6750__Meizu__U10__6.0__Flyme_5.2.3.0G__MRA58K__U 10.7z