GSM-Forum - View Single Post

Surtax · 04-28-2018, 08:27

MT6739 support, SPUnlock and more!

- Main
MT6739 CPU supported!
MT6739 moved from TEST to GENERAL support.
Firmwware read
Firmware write
NVRAM read
NVRAM write
Reset Settings / Format FS
Reset FRP
Reset Privacy
MemoryTool

- MemoryTool
Fixed PMT init on some devices
Optimized Expand/Collapse view functions
Fixed DA1804 and DA1712 loaders support for WIPE
Optimized NAND support

- Service
NVRAM module updated
.dynamic page detection
.some types support fixed
.repair security ( security type detection ) updated
FormatFS / Reset settings rebuild
.Activated fully automatic "FULL FACTORY" mode, designed for all modern devices ( include devices with SEC_CONTROL )
."FULL FACTORY" mode set to default
.Some "OLD" agents (DA15xx) may not work

- SP Unlock activated
Support all MTK modern phones, except MT6763 and MT6739.
Read codes and Direct Unlock mode supported
MT6570 eMMC ONLY devices supported

- Core
Fixed memory leak issues and problems with booting on some systems
Optimized different OLD agents support for MODERN devices ( DA16xx and DA17xx line )
SW more faster now
EMI handler for MT6570 and MT6797 fully automated and complete
Improved EMI lookup support for MT675x devices
EMIDB updated
Hint/Error explain module updated
MT6758 support under test
MT6771 support under test

- Flasher
Fixed break issue, when just one file selected for flashing.
HWInfo compatibility status shown in log in both cases ( succes or failed )

- FW reader
MT6739 support
New types of firmwares supported
Optimized NAND reading on DA18xx line loaders
Read Firmware size now shown in log

- New models included
Limited MEIZU support
Limited Oppo support
Limited Gionee support
Limited BQ support
Some basic "generic" secure devices support optimized

Known issues/warnings/info :
1. [NAND on MT6570] v1712,v1736 loader packages NOT SHOULD BE USED! Since they have ftl/ecc errors!
In result you will give read/write FW errors and rest problems at all.
Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write
2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format!
3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal and cannot be fixed.
Read-Write data, which you want, ignore "EMPTY" states.
4. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND devices! Result - stuck after system/userdata partition flashing
5. FileSystem flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list.
6. Cheap MT6739 devices require BATTERY REMOVING after EVERY operation in most cases!
7. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list!

this is the only upgrade package. unzip to a folder with the installed program

Link CM2MT2_r2.7z ? RGhost ? ?????????????

04-28-2018, 08:27	#1 (permalink)
Surtax No Life Poster Join Date: Aug 2013 Location: Russia, Ivanovo city Posts: 660 Member: 2006990 Status: Offline Thanks Meter: 540	CM2MT2 r2 MT6739 support, SPUnlock and more! - Main MT6739 CPU supported! MT6739 moved from TEST to GENERAL support. Firmwware read Firmware write NVRAM read NVRAM write Reset Settings / Format FS Reset FRP Reset Privacy MemoryTool - MemoryTool Fixed PMT init on some devices Optimized Expand/Collapse view functions Fixed DA1804 and DA1712 loaders support for WIPE Optimized NAND support - Service NVRAM module updated .dynamic page detection .some types support fixed .repair security ( security type detection ) updated FormatFS / Reset settings rebuild .Activated fully automatic "FULL FACTORY" mode, designed for all modern devices ( include devices with SEC_CONTROL ) ."FULL FACTORY" mode set to default .Some "OLD" agents (DA15xx) may not work - SP Unlock activated Support all MTK modern phones, except MT6763 and MT6739. Read codes and Direct Unlock mode supported MT6570 eMMC ONLY devices supported - Core Fixed memory leak issues and problems with booting on some systems Optimized different OLD agents support for MODERN devices ( DA16xx and DA17xx line ) SW more faster now EMI handler for MT6570 and MT6797 fully automated and complete Improved EMI lookup support for MT675x devices EMIDB updated Hint/Error explain module updated MT6758 support under test MT6771 support under test - Flasher Fixed break issue, when just one file selected for flashing. HWInfo compatibility status shown in log in both cases ( succes or failed ) - FW reader MT6739 support New types of firmwares supported Optimized NAND reading on DA18xx line loaders Read Firmware size now shown in log - New models included Limited MEIZU support Limited Oppo support Limited Gionee support Limited BQ support Some basic "generic" secure devices support optimized Known issues/warnings/info : 1. [NAND on MT6570] v1712,v1736 loader packages NOT SHOULD BE USED! Since they have ftl/ecc errors! In result you will give read/write FW errors and rest problems at all. Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write 2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format! 3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal and cannot be fixed. Read-Write data, which you want, ignore "EMPTY" states. 4. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND devices! Result - stuck after system/userdata partition flashing 5. FileSystem flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list. 6. Cheap MT6739 devices require BATTERY REMOVING after EVERY operation in most cases! 7. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list! this is the only upgrade package. unzip to a folder with the installed program Link CM2MT2_r2.7z ? RGhost ? ?????????????