View Single Post
Old 03-01-2002, 07:29   #4 (permalink)
mcrozz
Insane Poster
 
Join Date: Feb 2002
Location: Sweden
Age: 62
Posts: 97
Member: 9641
Status: Offline
Thanks Meter: 2
Check this, sri no blocks onlt txt but it might help out.............
this is for the 5110, donīt know if they are the same. If you want themanual contact me.



PAMS
Technical Documentation
NSE–1
Disassembly & Troubleshooting Instructions
Page 18 Original 03/98
Charger failure
YES
Nothing happens when charger is connected
Voltage level at pin 60 of CCONT (N100)
is higher than 0.4 V when charger is connected
NO Check
X100, F100, L104
R104, R103
YES
Check N100
Display Information: Not charging
YES
Voltage level at pin 62 of CCONT (N100)
is about 0.8 V when power is connected
BSI resistor value should be 39 k
NO Check
X101, R120, R122
YES
Voltage level at pin 63 of CCONT (N100)
is about 0.5 V when power is connected
BTEMP resistor value should be 47 k
NO Check
X101, R120, R122
YES
32 Hz square wave frequency at pin 7 of CHAPS (N101)
NO
Check
N100
Check
N101
YES
Voltage levels at pins 5 and 12 of CHAPS (N101)
are same as VB
NO
Check
R131, N101
YES
Voltage levels at pins 5 and 12 of CHAPS (N101)
rises when charger is connected
NO
  Reply With Quote
 
Page generated in 0.06417 seconds with 7 queries