[metam]

Originally Posted by JayDi

Use only Nokia3_MT6737M_Heart_FIH fw.
Untick preloader and HW verify.
Reflash.

I do it the same way ( im try all variant, tick untick.

Порядком уже устал от него

ScatCFG : BaseBand : MT6737 , Project : ne1 , Storage : EMMC
Setting : Flash Pre-Erase : Off ( Write Flash Only )
Setting : AFF verify : Enabled
Setting : HW verify : Disabled

BL : Check HW compatibility
BL : BBID NOT supported by BootLoader!
[BL_ERROR] : BBID : Break Flashing! This Firmware will kill phone!

Operation Failed
Elapsed: 00:00:12
Reconnect Power/Cable!

ScatCFG : BaseBand : MT6737 , Project : ne1 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Disabled
Setting : HW verify : Disabled

BL : Check HW compatibility
BL : BBID NOT supported by BootLoader!
[BL_ERROR] : BBID : Break Flashing! This Firmware will kill phone!

Operation Failed
Elapsed: 00:00:11
Reconnect Power/Cable!

Scatter Load Ok , BaseBand : MT6737 , Project : ne1 , Storage : EMMC
Files found : 14 , Set to Flash : 13
Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand : HMD Global
Device Model : TA-1032
Device CPU : MT6737M
Device IntName : Nokia 3
Device Version : 7.1.1
Device Compile : 07.09.2017 14:57:49
Device Project : alps-mp-n1.mp1-V1.11_fih6737m.65.nj.n1_P13
Device ExtInfo : Heart
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x05000000
BromVer : 0x00FF
BLVersion : 0x0002
PreLoader : Active [ Boot with PL ]
BootLdrSS : LOCKED with CERT
Processing DA stage
DA Select done, will use SecMode DA
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9B
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D333145F1A00D42FD8412FA
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM31E
[eMMC] : FLASH_CID : 150100514531334D420DA0F1FA1254FD
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0x3731B37989B8F17CF46C1EEF94368EEC
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6737 , Project : ne1 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Disabled

BL : Check HW compatibility
BL : BBID NOT supported by BootLoader!
[BL_ERROR] : BBID : Break Flashing! This Firmware will kill phone!

Operation Failed
Elapsed: 00:00:15
Reconnect Power/Cable!