GSM-Forum - View Single Post

**InfinitySupport** · 08-27-2005, 11:00

Hello,

I can't tell you exactly right now what of your 2 scheme is correct (I am far from my main location now and I don't have cables here to check pinout exactly).
For sure, one of two is correct. Gnd pin is Ok, Rx/Tx pins Ok too.
So, if you can make other cable, you will need to test only two times (change Rx with Tx if not works for first time).

Also, when you press Unlock button w/o phone, green box LED have to be blinking. If led not blinks, your problem can be with wrong selected COM port or maybe bad UniBox.

08-27-2005, 11:00	#6 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, I can't tell you exactly right now what of your 2 scheme is correct (I am far from my main location now and I don't have cables here to check pinout exactly). For sure, one of two is correct. Gnd pin is Ok, Rx/Tx pins Ok too. So, if you can make other cable, you will need to test only two times (change Rx with Tx if not works for first time). Also, when you press Unlock button w/o phone, green box LED have to be blinking. If led not blinks, your problem can be with wrong selected COM port or maybe bad UniBox.